tdod101 Posted April 5, 2016 Report Share Posted April 5, 2016 (edited) Never tuned these carbs before. Just got them. Always had the stock mikuni. I used the search and got an idea. 160 mains, jjh needle 2 clip from top and 50 pilot seems close(ish). What about air screw? Elevation 1000' Amsoil Dominator oil 50:1 94 octane Cool head w/ 24 domes 4mil dune port K&N dual pods CPI exhaust Vforce 4 reeds Edited April 5, 2016 by tdod101 Quote Link to comment Share on other sites More sharing options...
Sandking Posted April 5, 2016 Report Share Posted April 5, 2016 Typically 1 1/2 turns out to start on air screw Quote Link to comment Share on other sites More sharing options...
tdod101 Posted April 5, 2016 Author Report Share Posted April 5, 2016 Typically 1 1/2 turns out to start on air screw How's that jetting seem? Fairly close? Quote Link to comment Share on other sites More sharing options...
Sandking Posted April 5, 2016 Report Share Posted April 5, 2016 Stock cylinders? Quote Link to comment Share on other sites More sharing options...
Sandking Posted April 5, 2016 Report Share Posted April 5, 2016 Stock cylinders?If so I'd say your fat on main but plug chop to be sure I'm at 152 Quote Link to comment Share on other sites More sharing options...
tdod101 Posted April 5, 2016 Author Report Share Posted April 5, 2016 (edited) If so I'd say your fat on main but plug chop to be sure I'm at 152 4 mil dune port Edited April 5, 2016 by tdod101 Quote Link to comment Share on other sites More sharing options...
Sandking Posted April 5, 2016 Report Share Posted April 5, 2016 I've got almost an identical set up ported by HJR. Quote Link to comment Share on other sites More sharing options...
tdod101 Posted April 5, 2016 Author Report Share Posted April 5, 2016 I've got almost an identical set up ported by HJR. What's the float height generally supposed to be on these pwk? Quote Link to comment Share on other sites More sharing options...
Sandking Posted April 5, 2016 Report Share Posted April 5, 2016 19mm Quote Link to comment Share on other sites More sharing options...
tdod101 Posted April 5, 2016 Author Report Share Posted April 5, 2016 19mm And the needle? Quote Link to comment Share on other sites More sharing options...
Sandking Posted April 5, 2016 Report Share Posted April 5, 2016 Cel Quote Link to comment Share on other sites More sharing options...
tdod101 Posted April 5, 2016 Author Report Share Posted April 5, 2016 Cel How come cel? I'm not sure on the difference. Just alot of the searches brought up jjh Quote Link to comment Share on other sites More sharing options...
Sandking Posted April 5, 2016 Report Share Posted April 5, 2016 Taper, it's common for this set up and was recommended . Quote Link to comment Share on other sites More sharing options...
tdod101 Posted April 5, 2016 Author Report Share Posted April 5, 2016 Taper, it's common for this set up and was recommended . Think I read somewhere the transition through out the throttle range between bottom to top is better with the cel. Not 100% sure though. Is that why? Quote Link to comment Share on other sites More sharing options...
Sandking Posted April 5, 2016 Report Share Posted April 5, 2016 Not sure, it's just what Kevin recommended and I stuck with it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.