trickedcarbine Posted March 10, 2016 Report Share Posted March 10, 2016 I'm wanting to get it ordered, but I'm just curious if any one has had any issues with the ceramic on the end of titanium? Quote Link to comment Share on other sites More sharing options...
J-Madd Posted March 10, 2016 Report Share Posted March 10, 2016 Do you mean the ceramic ball the goes between the clutch push rods? I've had those shatter and backload and break gears. It happened in 5th gear so the backload shouldn't have hurt anything, but it did. Never used the titanium rod though. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 10, 2016 Author Report Share Posted March 10, 2016 Do you mean the ceramic ball the goes between the clutch push rods? I've had those shatter and backload and break gears. It happened in 5th gear so the backload shouldn't have hurt anything, but it did. Never used the titanium rod though. Hmm, that's what my worry was. Found a lot of different materials while looking for different weights to use in my slingshot. May start buying samples to see what's lightest of the ones that aren't ceramic. Can't find a Ti ball though. Quote Link to comment Share on other sites More sharing options...
JTmachining Posted March 10, 2016 Report Share Posted March 10, 2016 I'm wanting to get it ordered, but I'm just curious if any one has had any issues with the ceramic on the end of titanium?Post pics of TI part. TI does flex more than steel Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted March 10, 2016 Report Share Posted March 10, 2016 What about a carbide ball? Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted March 11, 2016 Report Share Posted March 11, 2016 What about the fucking OEM one because it works just fine? Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted March 11, 2016 Report Share Posted March 11, 2016 Post pics of TI part. TI does flex more than steel Titanium have a better specific young modulus (E/p) Quote Link to comment Share on other sites More sharing options...
JTmachining Posted March 11, 2016 Report Share Posted March 11, 2016 Titanium have a better specific young modulus (E/p) Sorry but take your BS somewhere away from me 3 Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted March 11, 2016 Report Share Posted March 11, 2016 Sorry but take your BS somewhere away from me Sorry, i thought you were BHQ's material guru... lol!! Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted March 11, 2016 Report Share Posted March 11, 2016 What about the fucking OEM one because it works just fine?Well that's what I use without issuies, just figured I'd throw some shit out there that might work. Quote Link to comment Share on other sites More sharing options...
JTmachining Posted March 11, 2016 Report Share Posted March 11, 2016 Sorry, i thought you were BHQ's material guru... lol!! You like to fill people's topics with BS posts. You don't have any clue of parts and application with most anything Banshee. Post less learn more 2 Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted March 11, 2016 Report Share Posted March 11, 2016 You like to fill people's topics with BS posts. You don't have any clue of parts and application with most anything Banshee. Post less learn more That's ok, even your knowledge have limits, especialy material wise. Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted March 11, 2016 Report Share Posted March 11, 2016 Just to be sure that no body is miss guided by blind statement. Ti have a young modulus (G) lower than steel, but it also have a lower density (D). So the important thing is the 'specific young modulus' i.e. G/D. So to be clear, pound for pound, Ti flex less than steel and that's the important thing to consider. That's why you find Ti everywhere in aerospace. Quote Link to comment Share on other sites More sharing options...
rjdgriff Posted March 11, 2016 Report Share Posted March 11, 2016 Just to be sure that no body is miss guided by blunt statement. Ti have a young modulus (G) lower than steel, but it also have a lower density (D). So the important thing is the 'specific young modulus' i.e. G/D. So to be clear, pound for pound, Ti flex less than steel and that's the important thing to consider. That's why you find Ti everywhere in aerospace. how has this guy not been banned? Trail bikes, FTW Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted March 11, 2016 Report Share Posted March 11, 2016 how has this guy not been banned? Trail bikes, FTW Science scare you? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.