Nathanwilmes Posted March 8, 2016 Report Share Posted March 8, 2016 Hey guys, just got done porting out my stock banshee (trail port with med boost ports) and i added some stuff and would like u guys to look it over and tell me if it looks good.aiming for a trail bike with some long straights. Have a short vid as well. 1) What type of aftermarket exhaust do you have? Pro Circuit 2) What type of airfilter do you have? 6" K&N, 1 big 3)air box with snorkel but 5 1" wholes in back of lid and 6 1" wholes on front inside lid of snorkel 4) What is your elevation? 800-1000 5) What size pilot jets are you using? 30 6) What size main jets are you using? 320 7) What temperature is your Banshee jetted for? ??? Usually 70-90 here 8) Do you have a port job? Did myself, trail port, med boost ports 9) What kind of carbs? Stock 10) What size carb? Stock Also put v4's on her. Will post a vid of it idling as soon as i fig how Quote Link to comment Share on other sites More sharing options...
Big Mike NY Posted March 8, 2016 Report Share Posted March 8, 2016 Did you just ask and then answer your own questions? 1 Quote Link to comment Share on other sites More sharing options...
Nathanwilmes Posted March 8, 2016 Author Report Share Posted March 8, 2016 Nope, i did all this to it and was woundering if jetting seemed correct to everyone else. Whatcha think Mikey? Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted March 8, 2016 Report Share Posted March 8, 2016 Nope, i did all this to it and was woundering if jetting seemed correct to everyone else. Whatcha think Mikey?Pics? sent from yo mammy house. Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted March 8, 2016 Report Share Posted March 8, 2016 What durations did you use for your trail port? sent from yo mammy house. Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted March 8, 2016 Report Share Posted March 8, 2016 You forgot temps and elevation. Really, only you can tell if it's jetted right. Either with plug chop or read. Quote Link to comment Share on other sites More sharing options...
Nathanwilmes Posted March 8, 2016 Author Report Share Posted March 8, 2016 You forgot temps and elevation. Really, only you can tell if it's jetted right. Either with plug chop or read. Ya i did, 800-1000 ft 70-90° Im gonna do my first plug chop first chance i get Quote Link to comment Share on other sites More sharing options...
Nathanwilmes Posted March 8, 2016 Author Report Share Posted March 8, 2016 Pics? sent from yo mammy house. You know how i upload them on here? Quote Link to comment Share on other sites More sharing options...
Nathanwilmes Posted March 8, 2016 Author Report Share Posted March 8, 2016 What durations did you use for your trail port? sent from yo mammy house. This my sound stupid to u pro's but i have no idea. I did a lot of video watching and bought the bits and did a clean up on exuast widening it but not hiring and then i dropped the windows almost all the way down and drilled boost ports. I will post pics as soon as i fig out how... Quote Link to comment Share on other sites More sharing options...
Nathanwilmes Posted March 8, 2016 Author Report Share Posted March 8, 2016 Says my files to big to upload urg... Quote Link to comment Share on other sites More sharing options...
Nathanwilmes Posted March 8, 2016 Author Report Share Posted March 8, 2016 I purchased a year perscription but it still says my file was to big to upload...any ideas? Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted March 8, 2016 Report Share Posted March 8, 2016 I have no experience with those pipes, but sounds like you should be close. Have been ridden this set up yet? If so, how did it feel? Quote Link to comment Share on other sites More sharing options...
Nathanwilmes Posted March 8, 2016 Author Report Share Posted March 8, 2016 https://goo.gl/photos/nUEjpB3eHWTgdn4G7 There you guys go. Thats a link to my rebuild pictures and a couple videos of it. Let me know what you think... Nothing too shinny yet Quote Link to comment Share on other sites More sharing options...
Nathanwilmes Posted March 8, 2016 Author Report Share Posted March 8, 2016 I have no experience with those pipes, but sounds like you should be close. Have been ridden this set up yet? If so, how did it feel? Not yet, gonna try to do a plug chop today pr tom if i can get someone to watch my daughter for a bit. Still wont be able to test it fully till i haul it somewhere. Live in the city : /, i have an awesome garage though. Whole layout under my house : ) Quote Link to comment Share on other sites More sharing options...
Nathanwilmes Posted March 8, 2016 Author Report Share Posted March 8, 2016 download your pictures to imgur.com or photobucket.... IMGUR.com FTMFW IMO..... ideally your jetting should be close but with home porting its not likely we will be able to really pin point you in a solid direction.. and especially if you went in porting blinded with no idea on port durations I had an idea but as i researched, i wanted bottom end so i didnt want to change the duration at all as it would raise my powerband, is what i understood but i could be wrong. I did barely hit it to clean it up nice though Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.