Texan99 Posted January 30, 2016 Report Share Posted January 30, 2016 Anyone have the issue of pt mids hitting the stock petcock? Or have more clearance with a dual pingel? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted January 31, 2016 Report Share Posted January 31, 2016 Woah. They shouldn't be that high at all 1 Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted January 31, 2016 Report Share Posted January 31, 2016 Spurdy's son had the same problem, but mine didn't hit. Quote Link to comment Share on other sites More sharing options...
rjdgriff Posted January 31, 2016 Report Share Posted January 31, 2016 I had a set of pt mids and they hit like a bitch Trail bikes, FTW Quote Link to comment Share on other sites More sharing options...
Big Mike NY Posted January 31, 2016 Report Share Posted January 31, 2016 Shit how the fuck do you correct that?? Quote Link to comment Share on other sites More sharing options...
Texan99 Posted January 31, 2016 Author Report Share Posted January 31, 2016 Ima try a dual pingel out before I start bending shit. Seems to have better clearance when I compare it to my buddies Banshee who's pipes seem to run higher than others I've seen. Here's a comparison. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted January 31, 2016 Report Share Posted January 31, 2016 You could prob put some half inch spacers on the rear side of the tank. That may help 1 Quote Link to comment Share on other sites More sharing options...
Texan99 Posted January 31, 2016 Author Report Share Posted January 31, 2016 I noticed my pipe hangers were ripping apart making it bend closer. Ordered some new ones so in a couple days I'll see if that makes a difference as well. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
rjdgriff Posted January 31, 2016 Report Share Posted January 31, 2016 I just bought new pipes lol Trail bikes, FTW Quote Link to comment Share on other sites More sharing options...
Texan99 Posted January 31, 2016 Author Report Share Posted January 31, 2016 These pipes damn near look new, I haven't seen in person this nice of used PTs before. Ima try what bluebanshee98 said with the spacers on the rear side of the tank. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted January 31, 2016 Report Share Posted January 31, 2016 You might try a washer or two between your pipe hanger and the frame to lean the pipe away from the petcock. Also you might be able to trim a small amount of aluminum off of your forward most silencer mount to further move things away. Just enough to keep the silencer from touching your frame if there is any excess currently. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.