250rfan Posted January 20, 2016 Report Share Posted January 20, 2016 Guys, Does anyone know if the OEM upper A-arms from years 1991-2003 part numbers - 3GG-23540-00-35 and 3GG23550-00-35 fit the 2005 Banshee?, the part numbers change at 2004 to 3GG-23540-00-PO and 3GG23550-00-PO. Does anyone know if there is any difference? I need a set of OEM upper A-Arms for my 2005, ebay have new replacements at a good price but they are for 1991-2003 years. Quote Link to comment Share on other sites More sharing options...
speeshee Posted January 20, 2016 Report Share Posted January 20, 2016 I think they would fit. I haven't heard of any update to the front suspension after a arms came out on them. You'll need opinion from someone else because I'm not sure Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
vrx46 Posted January 20, 2016 Report Share Posted January 20, 2016 A arms from any banshee from 1991 on will fit your frame Quote Link to comment Share on other sites More sharing options...
ban565 Posted January 21, 2016 Report Share Posted January 21, 2016 I have a 1991 and put 2006 upper and lower a arms on it Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted January 21, 2016 Report Share Posted January 21, 2016 If you have an a arm frame, all banshee a arms will fit. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted January 21, 2016 Report Share Posted January 21, 2016 They will fit. Different colors had different part numbers. Quote Link to comment Share on other sites More sharing options...
250rfan Posted January 21, 2016 Author Report Share Posted January 21, 2016 Thanks very much Guys, Ask the right question - you get the right answer, the different colours will explain the part number change. Looks like I have a relatively cheap fix now. Great site - Great members Thanks again for all who replied. G. Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted January 22, 2016 Report Share Posted January 22, 2016 Unless you get the set dirt cheap why not go with extended arms? Alba arms aren't too expensive Quote Link to comment Share on other sites More sharing options...
250rfan Posted January 24, 2016 Author Report Share Posted January 24, 2016 Thanks bluebanshee98 But I need a standard width front on this Banshee to make it easier going through the dunes, if the fronts wide you end up with the front steering the quad due to the dunes rather than the rider, I run an extended rear which is fine as it just follows the front without to much unsettling of the steering. Difficult to explain but for the dunes we have here a narrow front just makes an easier more enjoyable ride especially at speed. Thanks -G Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.