rebelbanshee2 Posted December 2, 2003 Report Share Posted December 2, 2003 I am planning on getting a stroker setup soon and instead of paying to get my already ported jugs re-ported for the same cost I would like to trade my ported jugs for some stock ones plus some cash. The cylenders are on the original bore and are only a year old with about 6 months riding on them. The porting was done by Steve Coe at Alba. The intake, transfers, and exaust ports have all been worked. It is a mid-top port and Alba claims 60+ horse with this porting and they are FAST! I want cylenders that are pretty new, no more than .20 over, and look good with the factory black paint on them. I have long studs for a PD head in them and dont have the stock studs. So, if you have long studs in yours it will save us the work of removing and installing studs. I will get some pictures up as soon as i can of the jugs and porting. Make me an offer. I can answer any other questions too. You get porting for cheap, i dont go bankrupt paying for my stroker Quote Link to comment Share on other sites More sharing options...
quadsrlife Posted December 2, 2003 Report Share Posted December 2, 2003 HOW MUCH DO U WANT PLUS STOCK CYLINDERS Quote Link to comment Share on other sites More sharing options...
rebelbanshee2 Posted December 2, 2003 Author Report Share Posted December 2, 2003 make me an offer Quote Link to comment Share on other sites More sharing options...
sneeky Posted December 3, 2003 Report Share Posted December 3, 2003 stock jugs 2000 banshee never unbolted still good compression plus $100 Y or N cheers Geoff P.S. are they O/S what diameter, will i need pistons too? (offer depends on other costs, not trying to mess you around) Quote Link to comment Share on other sites More sharing options...
rebelbanshee2 Posted December 3, 2003 Author Report Share Posted December 3, 2003 stock jugs 2000 banshee never unbolted still good compression plus $100 Y or N cheers Geoff P.S. are they O/S what diameter, will i need pistons too? (offer depends on other costs, not trying to mess you around) the bore is original, i think all that would be required would be a hone and new rings, i would like to get more that $100 though Quote Link to comment Share on other sites More sharing options...
1onice Posted December 3, 2003 Report Share Posted December 3, 2003 i will trade you my stocks(original bore) from my 98 plus $200 Quote Link to comment Share on other sites More sharing options...
mattmans1983 Posted December 3, 2003 Report Share Posted December 3, 2003 I have an 03 about 3 months old obviously stock bore & $150 Quote Link to comment Share on other sites More sharing options...
rebelbanshee2 Posted December 4, 2003 Author Report Share Posted December 4, 2003 ok here are some pics...they turned out real crappy transfers again intake bore+transfers nice jugs! Quote Link to comment Share on other sites More sharing options...
sneeky Posted December 4, 2003 Report Share Posted December 4, 2003 no problem man just thought i would break the ice and make an offer. Quote Link to comment Share on other sites More sharing options...
rebelbanshee2 Posted December 7, 2003 Author Report Share Posted December 7, 2003 bump Quote Link to comment Share on other sites More sharing options...
rebelbanshee2 Posted December 25, 2003 Author Report Share Posted December 25, 2003 Im going to top this one last time. I cant believe nobody is interested in this Quote Link to comment Share on other sites More sharing options...
BitchenBanshee Posted December 26, 2003 Report Share Posted December 26, 2003 Man I guess I won't be sending anything to alba. It's obviously ported but I think that he forgot the polishing part of it! Talk about a rough looking port job! It should look almost like a mirror in there! Quote Link to comment Share on other sites More sharing options...
Aussie Quad Racer Posted December 26, 2003 Report Share Posted December 26, 2003 i does not have to look like a mirror! But it should look neat and be simetrical! Have a look at those intake ports, i do not believe that a professional did these, was he on the turps when porting them??? Quote Link to comment Share on other sites More sharing options...
yamaha350 Posted December 26, 2003 Report Share Posted December 26, 2003 i could do a better port job with a round file. i will trade you stock port cylinders at .60 over strait up. Quote Link to comment Share on other sites More sharing options...
rebelbanshee2 Posted December 27, 2003 Author Report Share Posted December 27, 2003 the picture quality is extremely poor, so the exaust port does not look as shiney (it isnt mirror finish either but it doesnt have to be) and the intake does not look as good. They do look alot better than the pictures tell That being said, no this is not a 5 star looking port job, but it is still very darn fast. If you want a perfect job call up someone other than alba and have it done. if you want more power but dont have the money then i think this is a good deal...or you could port yours with a round file Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.