Darkblade Posted November 14, 2015 Report Share Posted November 14, 2015 ^^^ this Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted November 15, 2015 Report Share Posted November 15, 2015 If that's a 10mm crank, there is no way it's gonna work well with the niche cylinders. At least not without an astronomical amount of massaging. Typically most builders don't like to stuff more then a 7mm stroke in to stock cylinders. (Or stock style) Quote Link to comment Share on other sites More sharing options...
Darkblade Posted November 15, 2015 Report Share Posted November 15, 2015 If that's a 10mm crank, there is no way it's gonna work well with the niche cylinders. At least not without an astronomical amount of massaging. Typically most builders don't like to stuff more then a 7mm stroke in to stock cylinders. (Or stock style)i think he is gonna swap cranks with sleeper06 to like a stock crank so he can use the cylinders and pistons he has like they are Quote Link to comment Share on other sites More sharing options...
camatv Posted November 15, 2015 Report Share Posted November 15, 2015 sell the niche and get a good setup for the top end... get with someone who knows whats up and split the entiere bottom end. build from there. just what i would do. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.