PaymentPlan Posted November 10, 2015 Report Posted November 10, 2015 (edited) I'm doing a bumper to bumper overhaul on my bike this winter. I'll be reaching out to the members here frequently to help me build a monster. So here's the scoop, Redline is currently building me this engine. Everything is absolutely BRAND NEW and will be put together by Cam. I should have this engine on my front porch roughly middle spring 2016. Until then, I want to prepare everything else that I have so when its delivered, I can bolt it in and its complete. The engine list includes: 10 mil serval cub top end ported cylinder (polished exterior) new pistons (not sure what kind) race gas domes port match cases 10 mil billet crank with max and TZ trenched and powder coated cases (gloss black) billet head pro mod trans polished lock out cover lock out assembly race clutch kit adjustable timing plate override trans mod 39 pwk carbs (polished) billet intakes K and N filters and outwears V-Force 4 reeds pancake bearing cascade innovations stator case cover sharear big bore pipes gaskets + seals base gasket + hardware This is just a quick launch list that had been put together. A few alterations might come in towards the end but you see the picture being panted. I plan on cutting NO corners for this bike. I want the best of the best. Here is an EXACT photo of what my engine will look like, see below. Edited November 10, 2015 by controls77 Quote
PaymentPlan Posted November 10, 2015 Author Report Posted November 10, 2015 Sent from my SM-G900V using Tapatalk 2 Quote
PaymentPlan Posted November 10, 2015 Author Report Posted November 10, 2015 Currently I am down to the bare frame, and I'm going through everything on this bike to make sure its perfect. My initial questions regard frame clean up. I know I will not be needing stock exhaust tabs and coolant overflow reservoir tabs. Those are the only ones I can think of off the top of my head. If anyone can paste a link in here that already covers that topic, it would be greatly appreciated. Here is a picture of my frame. Quote
PaymentPlan Posted November 10, 2015 Author Report Posted November 10, 2015 Sent from my SM-G900V using Tapatalk Quote
PaymentPlan Posted November 10, 2015 Author Report Posted November 10, 2015 Sent from my SM-G900V using Tapatalk Quote
PaymentPlan Posted November 10, 2015 Author Report Posted November 10, 2015 Here is a little history of my previous build on the same quad. Pretty much bought a frankenstein bike. Had some bolt ons, rode it out for a little bit, and it took a dump. Quote
PaymentPlan Posted November 10, 2015 Author Report Posted November 10, 2015 Sent from my SM-G900V using Tapatalk Quote
PaymentPlan Posted November 10, 2015 Author Report Posted November 10, 2015 (edited) I had it rebuilt with a 4mil, basic port work, and the other basic upgrades. Edited November 10, 2015 by controls77 Quote
PaymentPlan Posted November 10, 2015 Author Report Posted November 10, 2015 (edited) Once that was in, I did a few upgrades to the appearance. I gave it some nice full sized fenders, some TLC and elbow grease. I only have one pic with the full set of fenders, and a few without them. These pics are after the rebuild. Edited November 10, 2015 by controls77 Quote
PaymentPlan Posted November 10, 2015 Author Report Posted November 10, 2015 For now its a frame and a box of parts. So I'm taking this build one step at a time, and I'm starting with the frame. Its going to be a gloss black like the cases in the above pic. Any suggestions on clean up? Any links to look at? Thanks guys. Your not going to want to miss out on this build. 1 Quote
camp0429 Posted November 10, 2015 Report Posted November 10, 2015 You wont need the stock air box tabs and tors mounting bracket. There was a thread here not long ago with everything circled that could be removed. This looked sweet before, can't wait to see the progress, keep it update. Quote
camp0429 Posted November 10, 2015 Report Posted November 10, 2015 This is not the one I was thinking, but it's helpful http://bansheehq.com/forums/index.php?showtopic=171188&page=1 Quote
mike0chek Posted November 10, 2015 Report Posted November 10, 2015 Sent from my SM-G900V using Tapatalk bling bling! surprised no chrome cases ha Quote
Bennett131 Posted November 10, 2015 Report Posted November 10, 2015 bling bling! surprised no chrome cases ha Polished* Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.