autolover3 Posted December 2, 2015 Author Report Share Posted December 2, 2015 Wishing i would have recorded measurements of all that :/ than I'd be more helpful haha Sent from my iPhone..... Somewhere? Quote Link to comment Share on other sites More sharing options...
autolover3 Posted December 8, 2015 Author Report Share Posted December 8, 2015 Hey guys. Been pretty busy lately. Just wanted to check in to keep this alive. Got my 08 yfz brake lever/master delivered today. Along with my fireball arms! And i got my blast cabinet altogether over the weekend. Made sure to seal all the seams and joints. Gonna hopefully get that hooked up this week to air and get some media and give er a wirl. Also picked up a oven off local sale site for $50. Thinkin of buyin a powdercoating gun to do the small things. And can use it at work for heating press fit stuff and what not. Win win i guess. Also helped a coworker with his truck this weekend. Drive to pick up set of rims and tires, Was getting some rust on the rockers and fender wells. Did some flares and bedlined the bottoms. Sent from my iPhone..... Somewhere? Quote Link to comment Share on other sites More sharing options...
JordyRoo Posted December 9, 2015 Report Share Posted December 9, 2015 Keep it going dude, looks good! Get some more pics up of your shee. Did you ever get those bits from JDS Quote Link to comment Share on other sites More sharing options...
autolover3 Posted December 9, 2015 Author Report Share Posted December 9, 2015 Keep it going dude, looks good! Get some more pics up of your shee. Did you ever get those bits from JDS Thanks man! Havnt really made any real progress lately. Just been gettin all my parts in and some tools setup for use later on. Got a few side jobs yet to finish up than i can focus more on the bike. Also still waiting on things from JDS, i had called them roughly a week or so ago and were waiting on bracket to be back from powdercoating. And my JL swinger is a couple weeks out too. But I did get my yfzr hubs today! Sent from my iPhone..... Somewhere? Quote Link to comment Share on other sites More sharing options...
autolover3 Posted May 30, 2016 Author Report Share Posted May 30, 2016 Alright. Sorry guys, few things came up over the winter which prevented me from being able to spend some time on the banshee. But the project is not dead!! Last week been cleanin up shop at home and gettin fathers projects finished up. Got all my stuff brought home from work as well. I'll have to go back through this thread to see where Im at and update pics. But heres where I'm at now. Test fitting everything before sending frame for powdercoat. My JL swinger came in and its beautiful lol. I would love to order some stage 3 elkas right now. But cost is keeping me. I found a set of triple rate works front shocks on ebay Thinkin those and have them with my rear gone through. I remember seeing a guy on here that does shocks.... Something "cal" suspension!? Socal maybe? Also need to cut my brackets for yfz calipers to fit, order a fancy bolt kit, and new bearings/bushings for all my suspension components Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
autolover3 Posted June 2, 2016 Author Report Share Posted June 2, 2016 Got my backshields cut. Test fitting calipers. Will need short bolts so they dont contact rotor when tightened. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted June 3, 2016 Report Share Posted June 3, 2016 Throw those fuckers in the trash Quote Link to comment Share on other sites More sharing options...
autolover3 Posted June 3, 2016 Author Report Share Posted June 3, 2016 Don't tell me how to live my life! Lol. I was debating it after seeing how flimsy they are. Just needed a lil push to trash em Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Dunatic619 Posted June 3, 2016 Report Share Posted June 3, 2016 Backshields = 1 Quote Link to comment Share on other sites More sharing options...
autolover3 Posted June 3, 2016 Author Report Share Posted June 3, 2016 Lol. Okay okay, I get it. They'll get scrapped! Anybody got white plastics they'd trade for black? Trying to decide what color to powdercoat stuff. Frame definitely red or blue. If I do red frame i would do either black or white plastics. Blue frame white plastics and white arms/swinger. How do you guys decide color combos?? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted June 3, 2016 Report Share Posted June 3, 2016 Lol. Okay okay, I get it. They'll get scrapped! Anybody got white plastics they'd trade for black? Trying to decide what color to powdercoat stuff. Frame definitely red or blue. If I do red frame i would do either black or white plastics. Blue frame white plastics and white arms/swinger. How do you guys decide color combos?? Sent from my iPhone using Tapatalk I don't. The person I'm buying the parts from does. Quote Link to comment Share on other sites More sharing options...
Dunatic619 Posted June 3, 2016 Report Share Posted June 3, 2016 I like chrome. All colors match with chrome. I've got a build going on too. Candy blue powdered frame and pearl blue fullbores. Trying to land a set a white full bores , but that prolly ain't happening. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.