chayote86 Posted November 2, 2015 Report Posted November 2, 2015 Looking for a better sprocket set up for my shee it currently has 13 up front and stock in the rear. Used to ride in Glamis but Going to LS and was wondering if it's best to run a bigger front since most racing out there is flat ground? Mods are ported cylinders, 35mm pwks, v- force 3s, T5s, lockout clutch, and a few other things Sent from my SM-G900V using Tapatalk Quote
STRIBZ Posted November 2, 2015 Report Posted November 2, 2015 go back to stock 14/41 or what i use and like 15/41 Quote
mike0chek Posted November 2, 2015 Report Posted November 2, 2015 15 in the front is nice if you have the power to turn that Quote
chayote86 Posted November 2, 2015 Author Report Posted November 2, 2015 Think my mods will handle a 15? Sent from my SM-G900V using Tapatalk Quote
chayote86 Posted November 2, 2015 Author Report Posted November 2, 2015 Cool gonna give that a try Sent from my SM-G900V using Tapatalk Quote
mike0chek Posted November 2, 2015 Report Posted November 2, 2015 you should be fine if you run a 18" tire, might be boggy with say some 22's Quote
STRIBZ Posted November 3, 2015 Report Posted November 3, 2015 i've been running 15 upfront since i only had fmf fatties and has always ran great.. you will be fine with a 15. just buy a 14 and 15.. only like $30 ea anyway.. Quote
chayote86 Posted November 3, 2015 Author Report Posted November 3, 2015 What length chain would I need for a 15/41? 106? Sent from my SM-G900V using Tapatalk Quote
chayote86 Posted November 3, 2015 Author Report Posted November 3, 2015 Stock swing arm Sent from my SM-G900V using Tapatalk Quote
STRIBZ Posted November 9, 2015 Report Posted November 9, 2015 yes that should be fine. i always go abit longer and trim it down. also make sure u match up the pitch. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.