Bennett131 Posted October 29, 2015 Report Share Posted October 29, 2015 You're forgetting the head gasket problems you gotta replace the head studs as well Sent from my iPhone using Tapatalk Yup it is a must Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted October 29, 2015 Report Share Posted October 29, 2015 You're forgetting the head gasket problems you gotta replace the head studs as well Sent from my iPhone using Tapatalk Yup it is a mustEh, partial truth to this. 6.0 head bolts and gaskets will fail from an egr cooler failure/leak or from improper box tunes. Egr cooler leaks allow coolant into the intake and the motor attempts to hydro lock, but the oem bolts stretch instead. The early tunes added too much timing causing head lift/gasket failure. Doing studs and gaskets is not a must do given the egr is removed and proper tuning used. The oem gaskets are the best product available to use. Studs will certainly drastically reduce the chances of head lift unless extreme boost is achieved. Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted October 29, 2015 Report Share Posted October 29, 2015 Eh, partial truth to this. 6.0 head bolts and gaskets will fail from an egr cooler failure/leak or from improper box tunes. Egr cooler leaks allow coolant into the intake and the motor attempts to hydro lock, but the oem bolts stretch instead. The early tunes added too much timing causing head lift/gasket failure. Doing studs and gaskets is not a must do given the egr is removed and proper tuning used. The oem gaskets are the best product available to use. Studs will certainly drastically reduce the chances of head lift unless extreme boost is achieved. I know the issuies what you said is not false but a brand new truck should not have these issuies from the factory. Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted October 29, 2015 Report Share Posted October 29, 2015 I know the issuies what you said is not false but a brand new truck should not have these issuies from the factory.Agreed. They should not. There are a rare few that have no issues with numerous miles on them. That being said, Ford and International were the first to try to become emissions compliant with the 6.0. They made mistakes with the emissions designs and unfortunately a lot of consumers had to deal with the issues. All three have experienced emissions equipment issues though. Even the beloved Cummins. Quote Link to comment Share on other sites More sharing options...
87sheerips Posted October 30, 2015 Author Report Share Posted October 30, 2015 Do you always drive with your fog lights on during the day? I try to. Thug life. Quote Link to comment Share on other sites More sharing options...
Gunner18 Posted October 30, 2015 Report Share Posted October 30, 2015 I try to. Thug life. Haha I'm gonna install my 50 inch led and drive around in the light with it on. Quote Link to comment Share on other sites More sharing options...
Gunner18 Posted October 30, 2015 Report Share Posted October 30, 2015 I try to. Thug life.All it needs is some wheels but clean ride man . Quote Link to comment Share on other sites More sharing options...
87sheerips Posted October 30, 2015 Author Report Share Posted October 30, 2015 All it needs is some wheels but clean ride man . Thanks man, but the light bar is taking it too far lol Quote Link to comment Share on other sites More sharing options...
Burke Posted October 30, 2015 Report Share Posted October 30, 2015 09 Cummins Quote Link to comment Share on other sites More sharing options...
Gunner18 Posted October 30, 2015 Report Share Posted October 30, 2015 Good amount of miles for an 09. Pretty hard miles I'm sure. Do you travel a lot. Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted October 30, 2015 Report Share Posted October 30, 2015 09 Cummins I'm assuming that motor was retuned and the egr turned off or removed? Quote Link to comment Share on other sites More sharing options...
willaduncan Posted October 30, 2015 Report Share Posted October 30, 2015 Ya. I highly doubt an injector is causing that. Most likely the lift pump getting weak or fuel filter needing changed. I'd change the filter and see if it goes away. You might have been right just changed the oil and fuel filter, fuel filter was BLACK and grimey Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
F1HDR Posted October 30, 2015 Report Share Posted October 30, 2015 You might have been right just changed the oil and fuel filter, fuel filter was BLACK and grimey Sent from my iPhone using Tapatalk Regardless of what anyone says, that fuel filter should be changed when you change oil. That black stuff is what happens to fuel in these modern high pressure common rail systems. The high heat and extreme pressure basically burns some of the fuel just in the rail. BG DFC+ fuel additive will solve that problem in the first tank. It's the ONLY stuff I recommend or use. Sent from my SM-G900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
F1HDR Posted October 30, 2015 Report Share Posted October 30, 2015 I sat through a 3 hr class last night that was specifically about modern diesel fuel, chemical makeup of it, API ratings, BTU values and so on. Sent from my SM-G900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
Gunner18 Posted October 30, 2015 Report Share Posted October 30, 2015 Wow everyone's got all this sick ass shit and here I am like Ya I have none of any of this shit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.