F1HDR Posted October 26, 2015 Report Share Posted October 26, 2015 That is funny banks does that. In this link to where to mount the probe, they suggest before the turbo. http://www.bankspower.com/techarticles/show/25-why-egt-is-important Lots of people put them before. I've seen them break and I'm smart enough to add 150 degrees to whatever it reads. 99% of people don't actually know what a safe temperature is for their engine anyhow. Sent from my SM-G900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
JTmachining Posted October 26, 2015 Report Share Posted October 26, 2015 I wouldn't go over 1200. But that's me Quote Link to comment Share on other sites More sharing options...
Sandking Posted October 26, 2015 Report Share Posted October 26, 2015 I was told 1100 by banks Quote Link to comment Share on other sites More sharing options...
F1HDR Posted October 26, 2015 Report Share Posted October 26, 2015 You're not having fun until it hits 1500 Sent from my SM-G900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
willaduncan Posted October 27, 2015 Report Share Posted October 27, 2015 Sweet. I'm not really familiar with performance stuff on the older 7.3's. (Like Tabata's, not the early 00's like your old one). My brother owns a diesel injection pump performance shop so I'm more in tune with the manual tuning. Learning about electronics though. My 6.4 has impressed me after minimal mods. Sent from my SM-G900V using Tapatalk You're a son of a bitch!!!!! I think an injector is going out in my 06 Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
willaduncan Posted October 27, 2015 Report Share Posted October 27, 2015 You're not having fun until it hits 1500 Sent from my SM-G900V using Tapatalk In my built 01 it wasn't rare to see 13-1400 on a pull Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
F1HDR Posted October 27, 2015 Report Share Posted October 27, 2015 You're a son of a bitch!!!!! I think an injector is going out in my 06 Sent from my iPhone using Tapatalk Lmao. Better put 6 in or you'll just chase your tail. Sent from my SM-G900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
willaduncan Posted October 27, 2015 Report Share Posted October 27, 2015 Lmao. Better put 6 in or you'll just chase your tail. Sent from my SM-G900V using Tapatalk Well idk if that's what it is but it has done a hard start twice today I can keep the ignition in the start position for just a bit longer than normal and it will lug-lug-lug-fire Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
F1HDR Posted October 27, 2015 Report Share Posted October 27, 2015 Well idk if that's what it is but it has done a hard start twice today I can keep the ignition in the start position for just a bit longer than normal and it will lug-lug-lug-fire Sent from my iPhone using Tapatalk Turns over slow then starts? or just turns over too long before it starts? Sent from my SM-G900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
willaduncan Posted October 27, 2015 Report Share Posted October 27, 2015 Turns over slow then starts? or just turns over too long before it starts? Sent from my SM-G900V using Tapatalk Turns over and tries to start, it turns over just fine... Just hesitant to start Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
JTmachining Posted October 27, 2015 Report Share Posted October 27, 2015 Until the probe rots off and goes through your turbo. I never put them before the turbo. Seen them wipe out too many turbine wheels. Sent from my SM-G900V using Tapatalk I was wrong. EGT is after turbo 1 Quote Link to comment Share on other sites More sharing options...
F1HDR Posted October 27, 2015 Report Share Posted October 27, 2015 I was wrong. EGT is after turboI had a feeling you had your shit done correctly. Sent from my SM-G900V using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted October 27, 2015 Report Share Posted October 27, 2015 I was wrong. EGT is after turboThat explains why the numbers seemed pretty low to me for pre turbo / manifold readings. 1,200 post turbo is definitely on the high side. We avoid going over 1,000 on ours post turbo reading. Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted October 27, 2015 Report Share Posted October 27, 2015 Just some info: On our 2000 7.3 we used to have the stock center section of the oem turbo with a Banks exhaust housing and then an ATS compressor housing with different compressor wheel. Any time we got over about 950 the truck would feel hot and you could tell you shouldn't go any further. We switched to a 38R ball bearing turbo which has a larger exhaust and compressor housing and flows a good bit more air. We can run up to about 1,100 on that turbo with very little heat feed back from the motor. Quote Link to comment Share on other sites More sharing options...
87sheerips Posted October 27, 2015 Author Report Share Posted October 27, 2015 Loving this truck! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.