2strokefolk Posted September 14, 2015 Report Share Posted September 14, 2015 I'm doing my research before buying a banshee. My question is which is better mono block or individual cylinder and why? Quote Link to comment Share on other sites More sharing options...
2strokefolk Posted September 14, 2015 Author Report Share Posted September 14, 2015 Thanks for the quick reply, however is there any advantages or disadvantages to using either one over the other? Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted September 14, 2015 Report Share Posted September 14, 2015 If you damage 1 side on a mono block you still pay for both bores to be plated. If you damage 1 side on a single just take it off and fix the bad 1. I've never hurt both sides at the same time, it's always hurt one and the other looks new still. Quote Link to comment Share on other sites More sharing options...
2strokefolk Posted September 14, 2015 Author Report Share Posted September 14, 2015 My plan is to build a rock solid motor pushing somewhere between 400-450cc, and I know I'm getting off topic. But how does one calculate the squish and all the other important factors that go into making a 2stroke run properly? I appreciate all the knowledge. Quote Link to comment Share on other sites More sharing options...
2strokefolk Posted September 14, 2015 Author Report Share Posted September 14, 2015 For the most part I plan ride through fast trails, but I would also like to be able to take it to the local tracks and air it out a bit. So I'd go more for mid to top end, bc I usually run balls to the wall majority of the time lol Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted September 14, 2015 Report Share Posted September 14, 2015 I honestly think you need a ported stock set first. Going by cc isn't really a good gauge on the setup. A ported stock stroke can be plenty fast. I've seen a 370 motor fly, can hang with my 4 mil no problem. Quote Link to comment Share on other sites More sharing options...
2strokefolk Posted September 14, 2015 Author Report Share Posted September 14, 2015 I'll defiantly look into it Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted September 14, 2015 Report Share Posted September 14, 2015 look into chassis setup, more important than power.This more then anything. I wish I would've spent as much on my chassis set up as I did my motor before I did the motor. Quote Link to comment Share on other sites More sharing options...
2strokefolk Posted September 14, 2015 Author Report Share Posted September 14, 2015 Only wish houser would make their A-arms for more than just the 450's and up. Their silcast, high ground clearance, and the trictrac seems like a very awesome setup. Though idk how well they actually work, but 10 out of 10 on the cool factor no doubt. Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted September 14, 2015 Report Share Posted September 14, 2015 There is absolutely no way anyone can use all of the power a bolt-on Banshee can offer without upgrading the suspension and controls first, period!! If you can't get the power to the ground and control it, what's the point? Suspension and controls first, especially if you're riding Moto-X!! Oh, and don't forget tires!! And, since you don't have a Banshee yet, may I ask if you've even ridden one yet? Quote Link to comment Share on other sites More sharing options...
2strokefolk Posted September 14, 2015 Author Report Share Posted September 14, 2015 The answer to that question is no, and that's not what I'm concerned about. I know the banshee is all that and a bag of chips, but something that's good can always be better. What I'm seeking is knowledge, so I get it right the first time and don't have to waste money on stuff I don't need. That's why I asked what all goes into tuning a motor to run properly, because why pay a builder and not know what all he did, when you can do the research yourself and then be your on builder. Besides I haven't figured out the "infinite money" cheat yet. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted September 14, 2015 Report Share Posted September 14, 2015 Up down down up left right right left A B B A 3 Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted September 14, 2015 Report Share Posted September 14, 2015 suspension is boring youre gonna need a 10cub on alky for trails Quote Link to comment Share on other sites More sharing options...
2strokefolk Posted September 14, 2015 Author Report Share Posted September 14, 2015 Nah, 93 is the highest I'll go so I can fill up anywhere when I need some go go juice. Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted September 14, 2015 Report Share Posted September 14, 2015 Up down down up left right right left A B B AFinish him! sent from yo mammy house. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.