DEM3500 Posted September 8, 2015 Report Share Posted September 8, 2015 ive had this posted in the past but a lot has changed so im starting over..... its had a handful of rides on it since i had if for sale the last time. but still not many at all. its been sitting in my barn since last summer and i just brought it out once last month. the most recent ride i let a buddy ride it and like an idiot he took it through deep water (no air box) and messed up something. it backfires so bad out of the right cylinder it blows the pipe off the head tube. i havent opened it up yet nore do i really want too lol but i will if i need to. so lets just assume it needs a whole top end. located in Burton MI $2800 i tore this thing down last summer to the frame and powder coated everything! frame, arms, front bumper, rear grab bar, nerf bars and swinger are prismatic powders splatter black http://www.prismatic...splatter-black/the hubs, spindles, brake hub, and sprocket hubs are prismatic powders ink blackhttp://www.prismatic...106S/ink-black/the port work is 1 out of 2 banshees that exist that have this engine setup. the only other bike thats setup like this was dynode at 70hp. i can say this with confidence because the guy that did the work is one of my best friends. i never dynoed it cause i really dont care about numbers. i just like to ride fast lol. if you are seriously interested in this i will give you the builders info.4mm stroker with matching port work.its runs on 110 octane and has only ever had amsoil dominator run through it.if i remember right its on its second or third bore.the head was shaved down and re domed to match the 4mm crank. basically it all looks like a stock banshee engine. its a total sleeper.....until you start it up!+2 +1 ASR a arms with newer teflon lined heims+4 roundhouse swinger with new pivot bearings (i think LSR)billet impeller with inline coolant cooler with temp gauge+1 antivibe steering stem with NEW bushings and boltspro taper barsASV C6 brake and clutch leversnewer brake pads front and rearNology profire coil with acell 8.8mm wireshttp://www.farmandsa...l.asp?partid=46GB racing CDI relocation brackethttp://www.banshee-p...cket-gb-racing/tusk adjustable width rear axlehttps://www.rockymou...dth-Racing-AxleFMF SST pipes with NEW o-ringsbrand NEW UNI pod filters34mm mikuni round slide carbsTORS eliminitatedteather kill switch shift drum has been modified with a roller bearing shift shaft has been modifiedscratches on the plastic but no cracksgripper seat cover with one small 1/2'' tear.axis single rate rear shock with remote rezzie. rebound and compression adjustableworks tripple rate front with remote rezzieim sure theres more that im forgetting. theres nothing much left thats still stock. this thing rips. theres no doubt about it. i hate to let it go but i just dont ride it anymore. Quote Link to comment Share on other sites More sharing options...
mike0chek Posted September 9, 2015 Report Share Posted September 9, 2015 looks nice in the first pic Quote Link to comment Share on other sites More sharing options...
RollinRhino Posted September 9, 2015 Report Share Posted September 9, 2015 .......tempting.....I like the powder coating. 1 Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 9, 2015 Author Report Share Posted September 9, 2015 Thanks That wrinkel finish is tough as nails! I've coated stuff with it before and beat on it with a hammer just to see what it could take. It dented the metal but the PC stayed strong Quote Link to comment Share on other sites More sharing options...
gusto Posted September 9, 2015 Report Share Posted September 9, 2015 This is a nice deal for someone. 1 Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 9, 2015 Author Report Share Posted September 9, 2015 i am willing to drive a hr or 2 if needed. Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 13, 2015 Author Report Share Posted September 13, 2015 Ttt Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 15, 2015 Author Report Share Posted September 15, 2015 someone buy this! Quote Link to comment Share on other sites More sharing options...
DEM3500 Posted September 17, 2015 Author Report Share Posted September 17, 2015 ttt Quote Link to comment Share on other sites More sharing options...
mike0chek Posted September 21, 2015 Report Share Posted September 21, 2015 has no one bought this yet? Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted September 22, 2015 Report Share Posted September 22, 2015 Just so everyone is clear, this bike is not ready to ride. It has some pretty serious motor problems correct? Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted September 23, 2015 Report Share Posted September 23, 2015 I guess he doesnt want to talk about it. Quote Link to comment Share on other sites More sharing options...
m671054 Posted September 25, 2015 Report Share Posted September 25, 2015 I would assume crank out of phase, bent rod,needs topend plus maybe electrical issues. Glws Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.