BANSHEERSA Posted September 1, 2015 Report Share Posted September 1, 2015 A guy came to buy my Shee and test rode it and top end wentout . So can somone give me a list of everything i will neeed to order? Jugs are fine no scratches in them . And im gonna go ahead a split cases while i got it this far so another list of what i will ne3d to order for that to thx ! Sent from my SM-G900P using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted September 1, 2015 Report Share Posted September 1, 2015 Might be further ahead to part it out as it is depending on what shape it's in. Quote Link to comment Share on other sites More sharing options...
mike0chek Posted September 1, 2015 Report Share Posted September 1, 2015 so did you do a compression test or did it seize?? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted September 1, 2015 Report Share Posted September 1, 2015 Top end went, but the bores are fine? Really? You're sure? Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted September 1, 2015 Report Share Posted September 1, 2015 Top end went, but the bores are fine? Really? You're sure?Gotta be warped. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted September 2, 2015 Report Share Posted September 2, 2015 Gotta be warped.I've had guys say man I just rebuilt it. I ask what the cylinder looked like. If they can see any crosshatch looking scuff marks. And they say "No, they looked like perfect mirrors. Smooth as glass so we put it back together"Oh.... Ya did huh? Quote Link to comment Share on other sites More sharing options...
kawa110 Posted September 2, 2015 Report Share Posted September 2, 2015 (edited) Smooth as glass= no friction, less heat, all good.......lol Edited September 2, 2015 by kawa110 Quote Link to comment Share on other sites More sharing options...
Bigtex45 Posted September 3, 2015 Report Share Posted September 3, 2015 Well word of advise when people test ride my stuff when I sell it. If it blows because of hotrodding and not being smart they bought it. But your best bet is to put new top end in. Pistons top end bearings and all the works. And make sure you use the same type of gaskets. Some can change your compression and make it blow up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.