zillakilla02 Posted July 23, 2015 Report Share Posted July 23, 2015 Hey guys so I picked up some of reflex shorty levers and install them yesterday and I can't seem to get the clutch lever free play adjusted right. No matter what I do it just doesn't seem to have enough to pull to release the clutch 100%. I'm starting to think that maybe I need to adjust inside down by the actual clutch basket or that maybe my friction plates are getting worn out. The stock lever seem to work but it was acting up a little bit when I would pull the clutch lever in and put it in gear sometimes it would conk out right away. Anybody ever install these levers and have any suggestions? I'm not too happy with these levers for the $160 I spent on them... the brake lever doesn't even fit inside the housing when u pull it in where it pushes the master cylinder. It gets stuck because the lever is too fat so I'll have to grind it down just pisses me off for the money I spent I should have went with asv!!! Sent from my SAMSUNG-SM-G870A using Tapatalk Quote Link to comment Share on other sites More sharing options...
possum Posted July 23, 2015 Report Share Posted July 23, 2015 Theres nothing you can do about the dissengagment. It doesnt have enough throw to release 100%. 1 Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted July 23, 2015 Report Share Posted July 23, 2015 Can you move the lever out further from the bar? 1 Quote Link to comment Share on other sites More sharing options...
zillakilla02 Posted July 23, 2015 Author Report Share Posted July 23, 2015 That's what I tried by adjusting the little screw that brings the lever further from the bar and it's still not enough... dammit!! Sent from my SAMSUNG-SM-G870A using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted July 23, 2015 Report Share Posted July 23, 2015 Try moving around the internal adjustment. I've had to jack mine around in the past, the arm might not line up perfectly with the arrow but you can probably get it to work. Quote Link to comment Share on other sites More sharing options...
Glorfindel Posted July 23, 2015 Report Share Posted July 23, 2015 I installed mine without any problems. 1 Quote Link to comment Share on other sites More sharing options...
zillakilla02 Posted July 23, 2015 Author Report Share Posted July 23, 2015 Try moving around the internal adjustment. I've had to jack mine around in the past, the arm might not line up perfectly with the arrow but you can probably get it to work.The arm on the top of case is lined up almost perfect with that little arrow that's why I don't know if I need to adjust down by the clutch Sent from my SAMSUNG-SM-G870A using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted July 23, 2015 Report Share Posted July 23, 2015 The arm on the top of case is lined up almost perfect with that little arrow that's why I don't know if I need to adjust down by the clutch Sent from my SAMSUNG-SM-G870A using Tapatalk That's what I'm saying, mine almost never lines up the way it should. Quote Link to comment Share on other sites More sharing options...
camp0429 Posted July 23, 2015 Report Share Posted July 23, 2015 Try adjusting your clutch, set the actuator a little to the left of the case arrow. I've had to do a few this way 1 Quote Link to comment Share on other sites More sharing options...
zillakilla02 Posted July 23, 2015 Author Report Share Posted July 23, 2015 That's what I'm saying, mine almost never lines up the way it should.Ok yeah I'll have to give that a try Sent from my SAMSUNG-SM-G870A using Tapatalk Quote Link to comment Share on other sites More sharing options...
zillakilla02 Posted July 23, 2015 Author Report Share Posted July 23, 2015 Try adjusting your clutch, set the actuator a little to the left of the case arrow. I've had to do a few this wayOk will do Sent from my SAMSUNG-SM-G870A using Tapatalk Quote Link to comment Share on other sites More sharing options...
camp0429 Posted July 23, 2015 Report Share Posted July 23, 2015 Might have a cable on it's way out also Quote Link to comment Share on other sites More sharing options...
zillakilla02 Posted July 24, 2015 Author Report Share Posted July 24, 2015 Might have a cable on it's way out alsoYeah that's what I read in my clymer that it could be stretched it's been on there since day one... I should just order a new cable anyways. Thanks for the help Sent from my SAMSUNG-SM-G870A using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.