Vincip92 Posted June 20, 2015 Report Share Posted June 20, 2015 blew up my top end on my bike took it apart found a ton of sand in the top and bottom end i dont have the tools to take apart the bottom end and i was gonna take it to a shop to get taken apart and flushed around how much do you think they would charge me to do that i already have a full wiseco rebuild kit im going to have them do the bottom while they have it a part just curious on the price you guys think they would burn me for Quote Link to comment Share on other sites More sharing options...
Vincip92 Posted June 20, 2015 Author Report Share Posted June 20, 2015 Splitting the crank Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Vincip92 Posted June 20, 2015 Author Report Share Posted June 20, 2015 Ok that's around what the guy quoted me from Yamaha he's gotta take it completely apart flush it get all the sand and metal shards from the left piston that grenaded itself Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted June 21, 2015 Report Share Posted June 21, 2015 So is that $200 cover everyting labor wise? Just split cases and R&R crank and you install cyl? Sure hope they're replacing every bearing in crank + new rods. Let us know if they hit you with "extras" at the end. Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted June 21, 2015 Report Share Posted June 21, 2015 Zilla 200 is way cheap and would bring me to the question what are they really doing ? Where are you located , I would stear clear of dealerships Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted June 21, 2015 Report Share Posted June 21, 2015 It said 390 with rods Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted June 21, 2015 Report Share Posted June 21, 2015 230 for bearing swap sound about rite Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted June 21, 2015 Report Share Posted June 21, 2015 I've been building cranks for a lil while, it's a pain in the ass 1 Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted June 21, 2015 Report Share Posted June 21, 2015 Hr rods just went up in price so old prices from most shops might be adjusted Quote Link to comment Share on other sites More sharing options...
Coupelx Posted June 22, 2015 Report Share Posted June 22, 2015 Ask around about the work from local shops. my experience is less than good. Quote Link to comment Share on other sites More sharing options...
Vincip92 Posted June 22, 2015 Author Report Share Posted June 22, 2015 The shop is just charging me for labor I have everything already crank seals and bearings they are going to install everything for me so when I get it back I just have to do the top end Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.