70duster Posted May 28, 2015 Report Share Posted May 28, 2015 98 banshee has realy bad bog doesnt feel like it gets to the power band. Mods. Bills full exhaust billet intake manifold with built in crossover tdr reeds on stock cages knn pod filters stock carbs motor .30 over no port work. Mains at 280 pilot 35 has aftermarket needles. spec according to bills is 35 pilot 310 main ran too rich with that. Temp about 75 f elevation about 5-700 illinois. Did compression test about 115-120 psi both cylinders did leakage test held 6psi for over 6 min Has tors deleted completely and new coil plus wires and caps. Think my pilots too rich gona hunt down stock needles too. Quote Link to comment Share on other sites More sharing options...
camp0429 Posted May 28, 2015 Report Share Posted May 28, 2015 Think my pilots too rich gona hunt down stock needles too. Sounds like you answered your own question. 35 is huge with no port, may not be the whole issue but it's a start Quote Link to comment Share on other sites More sharing options...
70duster Posted May 28, 2015 Author Report Share Posted May 28, 2015 I ordered a kit with 280-300 mains 30 pilots and I assume stock needles. U think 30s r still too large? Quote Link to comment Share on other sites More sharing options...
camp0429 Posted May 28, 2015 Report Share Posted May 28, 2015 I would try 30's and see how it likes them. How is the idle now with the 35's? How does it act with air screw adjustements? Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted May 28, 2015 Report Share Posted May 28, 2015 "kit"? Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted May 28, 2015 Report Share Posted May 28, 2015 "kit"? That's when you buy something that normally has more than a few pieces in it. Sometimes called a kit. In this instance a "jet kit" 2 Quote Link to comment Share on other sites More sharing options...
70duster Posted May 28, 2015 Author Report Share Posted May 28, 2015 I have the air screw set at 1.5 turns out. Havent tried messen with it. Idles good Quote Link to comment Share on other sites More sharing options...
70duster Posted May 31, 2015 Author Report Share Posted May 31, 2015 Got a chance to mess with it today. Threw the 30 pilots in still a little rich so I threw the stockers back in and it reved high. Turned the air screw to 1 turn out brought back down figure im in between pilots. Also this jet kit came with some stupid red needles obviously not stock. Any one know where I can find stock needles? Or has any one tried cascades performance needle? Quote Link to comment Share on other sites More sharing options...
camp0429 Posted May 31, 2015 Report Share Posted May 31, 2015 27.5 Quote Link to comment Share on other sites More sharing options...
98_sheester Posted May 31, 2015 Report Share Posted May 31, 2015 I bet those stupid red needles are a little bigger than your stockers...if you plan on going bigger with more power you might want those stupid red needles... 1 Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted May 31, 2015 Report Share Posted May 31, 2015 Those needles are vitos. I tried them once, and didn't like them. sent from yo mammy house Quote Link to comment Share on other sites More sharing options...
70duster Posted May 31, 2015 Author Report Share Posted May 31, 2015 Thats what I thought. I dont plan on making it any bigger. Any one know where I can get the stock needles? Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted May 31, 2015 Report Share Posted May 31, 2015 Try the wanted section. I ordered mine from a local dealership awhile back. Couldn't just get the needles had to buy needles , clips, and slides.......bastards. sent from yo mammy house Quote Link to comment Share on other sites More sharing options...
98_sheester Posted May 31, 2015 Report Share Posted May 31, 2015 I prolly have some laying around actually Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted May 31, 2015 Report Share Posted May 31, 2015 I prolly have some laying around actuallyI hope you have them put away somewhere. It doesn't take much to fuck up needles. Any other parts you have laying around for free......Just send them my way lol. sent from yo mammy house Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.