98_sheester Posted May 11, 2015 Report Share Posted May 11, 2015 Id deff put the 30s in the fmfs like the big pilots Quote Link to comment Share on other sites More sharing options...
markjohnson151 Posted May 11, 2015 Author Report Share Posted May 11, 2015 Ok sounds good. Thanks Quote Link to comment Share on other sites More sharing options...
willaduncan Posted May 12, 2015 Report Share Posted May 12, 2015 (edited) No the 30 is gonna be way too much... I bet if you throw that 30 in there you will be atleast 3 turns out on the air screw if not more. I would go with the 27.5 I bet if you get this thing where you like it you will be with 21 or 22 cc domes 280-290 main 27.5 pilot needle on the 4th or middle clip Sent from my iPhone using Tapatalk Edited May 12, 2015 by willaduncan Quote Link to comment Share on other sites More sharing options...
98_sheester Posted May 12, 2015 Report Share Posted May 12, 2015 No the 30 is gonna be way too much... I bet if you throw that 30 in there you will be atleast 3 turns out on the air screw if not more. I would go with the 27.5 I bet if you get this thing where you like it you will be with 21 or 22 cc domes 280-290 main 27.5 pilot needle on the 4th or middle clip Sent from my iPhone using Tapatalk I have close to the same set up with pipes and reeds and hes gonna want 30s esp running fatties and vf3 But i have some 27.5 if you wanna buy em Quote Link to comment Share on other sites More sharing options...
willaduncan Posted May 13, 2015 Report Share Posted May 13, 2015 I have close to the same set up with pipes and reeds and hes gonna want 30s esp running fatties and vf3 But i have some 27.5 if you wanna buy em In another post you claim to run 27.5 but here you claim 30. So now you're just trying to make the OP think yall have the same setup so he's gonna toss a 30 in there and be wasting time. OP I'm telling you bro try a 290 main 27.5 pilot needle middle clip air screw 1.5 turns out then post a pic of the plugs Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
98_sheester Posted May 13, 2015 Report Share Posted May 13, 2015 I have both sets of reed dude i bought some off infamous out his part out an i have vf3 reeds i have extra parts such as carbs and they are jetted according since i do travel to duff elevations so if youd me to show you thats fine but i know what my carbs like with each setup and ask anyone if the vf reeds like big pilots there gonna say yes so anything else Quote Link to comment Share on other sites More sharing options...
98_sheester Posted May 13, 2015 Report Share Posted May 13, 2015 And sorry mark for this dumb situation that is accuring but i think you will like the 30 with those pipes amd those reeds if not take 15 mins and switch em 27.5 and be like hey your wrong Quote Link to comment Share on other sites More sharing options...
98_sheester Posted May 13, 2015 Report Share Posted May 13, 2015 The post is idle problem if you wanna read it tho Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted May 13, 2015 Report Share Posted May 13, 2015 I believe it's the vf4s that like a bigger pilot. Quote Link to comment Share on other sites More sharing options...
willaduncan Posted May 13, 2015 Report Share Posted May 13, 2015 I believe it's the vf4s that like a bigger pilot. This is what I have heard as well but I jumped from stock stroke to 4 mil and vf2 to vf4 and stayed at a 27.5 the 30 was way to big I couldn't hold an idle Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
lowidenfast Posted May 13, 2015 Report Share Posted May 13, 2015 I agree with willaduncan assuming your motor is not ported - do you know if it has any port pork done to it? I have a stock motor with no port work, T5 pipes, K&N pods (no air box) and VF4 reeds at ~800 ft elevation and run 27.5 pilots with 300 mains. 300 mains still seems a tad rich, I could probably run 290's. Tried the 30 pilots when I upgraded to VF4's and ended up with the air screws too far out and had to go back down to 27.5 1 Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted May 13, 2015 Report Share Posted May 13, 2015 This is what I have heard as well but I jumped from stock stroke to 4 mil and vf2 to vf4 and stayed at a 27.5 the 30 was way to big I couldn't hold an idle Sent from my iPhone using Tapatalk No bike/engine is the same. Im sure some needed 30s, and some didn't. Just saying vf4s are the only ones I know of liking a bigger pilot on a stock bike. Quote Link to comment Share on other sites More sharing options...
98_sheester Posted May 13, 2015 Report Share Posted May 13, 2015 And hes running fmf pipes and they call for 30s also for jus the pipes Quote Link to comment Share on other sites More sharing options...
willaduncan Posted May 13, 2015 Report Share Posted May 13, 2015 (edited) Bigweav hit the nail on the head no 2 bikes are going to be the same on jetting and he very well could end up with a 30 but I'm betting that won't be the case here Sent from my iPhone using Tapatalk Edited May 13, 2015 by willaduncan Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted May 13, 2015 Report Share Posted May 13, 2015 Nigerian hit the nail on the head no 2 bikes are going to be the same on jetting and he very well could end up with a 30 but I'm betting that won't be the case here Sent from my iPhone using Tapatalk Lol, I'm no Nigerian. I'm a big ole white boy.........., and country as a sumbitch. 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.