98_sheester Posted April 14, 2015 Report Share Posted April 14, 2015 (edited) So i just replaced my trans oil with 20w50 wet clutch. So i put 1.6 qrt like the manuel says but after i let it warm up there was no oil on the stick so i put the 2 qrts in and still no oil on my stick any help? Edited April 14, 2015 by 98_sheester Quote Link to comment Share on other sites More sharing options...
98_sheester Posted April 14, 2015 Author Report Share Posted April 14, 2015 Im pretty sure its the stock plastic black one Quote Link to comment Share on other sites More sharing options...
98_sheester Posted April 14, 2015 Author Report Share Posted April 14, 2015 As far as i know the cases are stock and the stick. And yes there is 2 qrt in it with no oil showing on the dip stick and i dont see and oil on the ground or any vent tubes. Quote Link to comment Share on other sites More sharing options...
98_sheester Posted April 14, 2015 Author Report Share Posted April 14, 2015 Also i checked it warmed up and did not screw the stick in is this the correct way Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted April 14, 2015 Report Share Posted April 14, 2015 Does it smoke like a freight train when running, and smell like shit? Sent from your mammy house Quote Link to comment Share on other sites More sharing options...
98_sheester Posted April 14, 2015 Author Report Share Posted April 14, 2015 No it doesnt smoke only when it cold warming up and its blue smoke and it doesnt smell Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted April 14, 2015 Report Share Posted April 14, 2015 You put two qts of oil in, and no sign of oil on dipstick? You sure it's the stock/ right dipstick in it? Sent from your mammy house Quote Link to comment Share on other sites More sharing options...
98_sheester Posted April 14, 2015 Author Report Share Posted April 14, 2015 No im not 100 percent its stockas i bought the bike used. But i have done every mod listed from stock. This is the only thing that im not sure of how to tell if the cases are stock Quote Link to comment Share on other sites More sharing options...
98_sheester Posted April 14, 2015 Author Report Share Posted April 14, 2015 Ok after i screw it in im barely on the stick with oil. Should i buy a new stick and check Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted April 14, 2015 Report Share Posted April 14, 2015 (edited) Just measured two stock dipsticks. They should measure a cunt hair over 5 and 7/8 in inches Sent from your mammy house Edited April 14, 2015 by bigweav81 Quote Link to comment Share on other sites More sharing options...
98_sheester Posted April 14, 2015 Author Report Share Posted April 14, 2015 Ok is that starting from the threads Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted April 14, 2015 Report Share Posted April 14, 2015 Overall Sent from your mammy house Quote Link to comment Share on other sites More sharing options...
98_sheester Posted April 14, 2015 Author Report Share Posted April 14, 2015 Ok so from the top the all the way to the end jus barley over 5 7/8 Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted April 14, 2015 Report Share Posted April 14, 2015 (edited) Yeah, barely would be a stubble......cunt hair more like a 16th Sent from your mammy house Edited April 14, 2015 by bigweav81 Quote Link to comment Share on other sites More sharing options...
98_sheester Posted April 14, 2015 Author Report Share Posted April 14, 2015 Ok im on my way back to my place so ill see if its the same and if it is what do you think could be the issue Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.