Demon350 Posted November 25, 2003 Report Share Posted November 25, 2003 hey, i just got dynojet jets and needles with my toomeys, i installed the jets + needles and it wont run, i had it running before with the jets etc but the right carb was wrong so i disasembled it, reasembled and now it wont run, any1 help here Quote Link to comment Share on other sites More sharing options...
fixitrod Posted November 25, 2003 Report Share Posted November 25, 2003 Are the slides in the correct carbs, choke tube in place, pilot jets in, fuel turned on , carbs synced? Does it start at all. Did you try disconnecting the tors. Quote Link to comment Share on other sites More sharing options...
Demon350 Posted November 25, 2003 Author Report Share Posted November 25, 2003 i dont realy know much man, all i did was put the new needles in, new jets, connect it back up, put the fuel pipe back on and air filter and it wont run. it was runing few days before but smokey as hell, left pipe blued and the right 1 didnt, thats why i checked it all over again and its made problems alot worse Quote Link to comment Share on other sites More sharing options...
Banchetta Posted November 25, 2003 Report Share Posted November 25, 2003 Sounds like the equalizer tube between the carbs isn't on....You might have pulled the carbs out w/o realizing you pulled the tube off....its about 1/4" x 2" long.... Quote Link to comment Share on other sites More sharing options...
ledofthezep Posted November 26, 2003 Report Share Posted November 26, 2003 I think banchetta's got it right here...sounds like it anyway. That could be a real bugger to figure out if you didn't know it was there in the 1st place. It's just a little hose connecting both carbs. Take a look, it's probably hanging on one of the carbs still, but not connecting the two. Quote Link to comment Share on other sites More sharing options...
Demon350 Posted November 27, 2003 Author Report Share Posted November 27, 2003 im sure that pipe is connected, its a little gray tube connected from each carb into 1 pipe ? my friends comin tonight, ill let u know how he got on with the problem, thanks anyways, any ideas for a new mod ? all i have is pipes need more ! Quote Link to comment Share on other sites More sharing options...
Banchetta Posted November 27, 2003 Report Share Posted November 27, 2003 No, its a rubber tube that goes between the center of the carbs...The tube your talking about is where the boost bottle goes on top of the reeds right??? Quote Link to comment Share on other sites More sharing options...
Demon350 Posted November 27, 2003 Author Report Share Posted November 27, 2003 i duno what tube that it man, i only seen 1 gray 1 and where is the centre of the carbs ? u mean the top part where the throttle cable n stuff goes ? Quote Link to comment Share on other sites More sharing options...
Demon350 Posted November 27, 2003 Author Report Share Posted November 27, 2003 i checked over everything, i only see 1 black tube thats not connected, i think its a pipe incase the carb floods or somthing, or is this the pipe u wer talking about ? Quote Link to comment Share on other sites More sharing options...
Banchetta Posted November 28, 2003 Report Share Posted November 28, 2003 i checked over everything, i only see 1 black tube thats not connected, i think its a pipe incase the carb floods or somthing, or is this the pipe u wer talking about ? If its not connected then it could be the one.. It connects the two carbs in the middle of the carbs...1/4" x 2" long... Quote Link to comment Share on other sites More sharing options...
Demon350 Posted November 28, 2003 Author Report Share Posted November 28, 2003 sorted, it was the black tube afterall, cant wait 2 hit the dunes thanks for all ur help i realy appreciate it later every1 ill try get some pics of my shee soonif i get tis damn scanner working im out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.