trickedcarbine Posted March 14, 2015 Report Share Posted March 14, 2015 At least 7" for that cub. Quote Link to comment Share on other sites More sharing options...
superfastyfz450driver Posted March 14, 2015 Author Report Share Posted March 14, 2015 Here's some more updated pictures. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted March 14, 2015 Report Share Posted March 14, 2015 Is there any way you can fit the pods in without the air tract tubes? Pretty strong chance those tubes are going to rob some power. Sent from my DROID RAZR using Tapatalk Quote Link to comment Share on other sites More sharing options...
camatv Posted March 15, 2015 Report Share Posted March 15, 2015 hope your using a rear remote ressy shock? the front a-arm ball joint sticking out that far is really scarry.. silencers look nice! Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 15, 2015 Report Share Posted March 15, 2015 PWM's for carbs? I like them on 250 dirt bikes, never tried them on a banshee. They decent on that kitty cub? Quote Link to comment Share on other sites More sharing options...
superfastyfz450driver Posted March 15, 2015 Author Report Share Posted March 15, 2015 There 36 mm mikuni carbs. Not sure the model. They Came on the 98-99 arctic cat 440 sno pro race sleds. The intake tubes are as short as possible and they are 2.5" id so time will tell Quote Link to comment Share on other sites More sharing options...
superfastyfz450driver Posted March 15, 2015 Author Report Share Posted March 15, 2015 Yes going with a remote rezzi shock. Just using this for fitment. The a arms have over 5 years of mx abuse on them so if I had an issue it should have happened by now. Plus it's only going to be used for ice racing. Dirt oval. Supermoto and the occasional drag Quote Link to comment Share on other sites More sharing options...
superfastyfz450driver Posted March 15, 2015 Author Report Share Posted March 15, 2015 Made some mounts for the intake tubes and muffler canisters. Fit the nerf bars and put a front cross tube and used it to make the lower engine torque mounts. Things are going good so far. Going to work on the upper control arms after work this week if I have time. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted March 16, 2015 Report Share Posted March 16, 2015 looking badass with CPI`s, does the rad still fit nice Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 16, 2015 Report Share Posted March 16, 2015 None the less, mowing through this build. We went from a couple of texts to a fast450 sending me photos of this happening a few hours later. This dude has scary ambition! Quote Link to comment Share on other sites More sharing options...
superfastyfz450driver Posted March 16, 2015 Author Report Share Posted March 16, 2015 Rad does not fit. I ordered a set of mishimoto dirt bike radiators to fit in Quote Link to comment Share on other sites More sharing options...
superfastyfz450driver Posted March 16, 2015 Author Report Share Posted March 16, 2015 Well I got lucky. I compared the geometry of my a arms and these here I only built +2 3/8. So I built some new spacers and got all the clearance I needed without having to cut the arms. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
superfastyfz450driver Posted March 19, 2015 Author Report Share Posted March 19, 2015 Here's some updates. Figured out how to make some rads work a tacked some brackets in place. And for shits and giggles tried my old laker custom front fender. Now I need to find a white one lol. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
superfastyfz450driver Posted March 21, 2015 Author Report Share Posted March 21, 2015 Got my coolant lines figured out. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted March 22, 2015 Report Share Posted March 22, 2015 lol wow thats different Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.