gordo_dk Posted March 2, 2015 Report Share Posted March 2, 2015 As the title says... I swapped out the clutch for a driveline set up and direct drive lock up...and when I went to kick it over it starts but bogs down until it dies...also when it kicks back its harder than usual..any help will be greatly appreciated thanks! Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 2, 2015 Report Share Posted March 2, 2015 Start it in neutral? With my sling shot, it's gotta be hot to even have a chance in hell starting it in gear. Otherwise you have issues elsewhere and something in there isn't right. Quote Link to comment Share on other sites More sharing options...
gordo_dk Posted March 2, 2015 Author Report Share Posted March 2, 2015 I tried and nothin I'll try again tomorrow hopefully it's that otherwise it's gonna suck to have to take it all apart, Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
BUILDER Posted March 2, 2015 Report Share Posted March 2, 2015 If it kicks harder than usual you put something together wrong inside there dude! You missed a washer or put it on the wrong side basically if it is kicking over harder than usual or it is bogging bad then something in there is dragging hard. I would not try to start it again I would pull it back apart and see what you put in wrong. Quote Link to comment Share on other sites More sharing options...
wfobasheeboy Posted March 2, 2015 Report Share Posted March 2, 2015 If it kicks harder than usual you put something together wrong inside there dude! You missed a washer or put it on the wrong side basically if it is kicking over harder than usual or it is bogging bad then something in there is dragging hard. I would not try to start it again I would pull it back apart and see what you put in wrong. X2^^^ Quote Link to comment Share on other sites More sharing options...
BUILDER Posted March 3, 2015 Report Share Posted March 3, 2015 So he dont like the answers he is getting here so now he is posting on facebook to see if he can get better answers Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted March 3, 2015 Report Share Posted March 3, 2015 He wants somebody on fb to tell him that it's fine. Quote Link to comment Share on other sites More sharing options...
BUILDER Posted March 3, 2015 Report Share Posted March 3, 2015 He posted the video of it on facebook and one of the first replies was (what pipes are on it) What the fuck does that have to do with you fucking up a clutch install??? LOL 1 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 3, 2015 Report Share Posted March 3, 2015 Asking the FB group for help is as good of a decision as voting Obama into office.STFU, Like Mitt Romney was such a prime specimen. They both suck. All choices have sucked since Bill. 1 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 3, 2015 Report Share Posted March 3, 2015 Ron Paul write in! PHaggot. 2 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 3, 2015 Report Share Posted March 3, 2015 Just a touch. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.