ONLY2STROKES Posted February 13, 2015 Report Share Posted February 13, 2015 (edited) either the engine or chassis must go first. I will list all other parts and specifics after that. the engine has a normal break in period and 20 passes at most on the follow new parts. hotrods trued and welded longrod 4mm stroker crank, shift forks, seals, piston rings and hone. all other engine components are in great shape. it is fresh and ready to run with custom cut 18cc domes and noss cool head. included will be v force 2 reeds with newer petals and upp intakes for 38-42mm carbs. it has stock ratio straight cut gears in it with a nice billet basket. dd lockup clutch with newer yzf1000 plates and montoon lockup cover. it has an adjustable stator plate in it. the tranny is a N down 1-5 overide and shifts like butter! the wiseco pistons are about a drag season old, but they were too nice not to reuse. I just ran the silica ball hone through it and threw on new rings. kicking comp is right around 190#. the top case does have chain wack and the black paint on the flywheel cover has a few nicks in it. im not sure who made the flywheel cover, but it is a nice billet one. I have gas and alky carbs that can go with the engine if wanted. gas carbs are 40.5 pwks with boyesen bowls and a nw cable. alky cabs are 40 lectrons with pe1 needles, option of dual powerjets and big billet bowls set for gravity feed. they come with a new terry cable. I also have the big, either 12 or 14" filters that can be included. the engine is missing a flywheel. I had a problem with a flywheel a few races go and there was a loaner on it. I had to give that back. (thanks brad) it will come with the kick starter and a nice billet shifter. in 2013 this quad won season points in heads up, cc classes 380-425 and 425-550. I didn't takeit out enough in 2014 to win any points standings. I feel I could have achieved 3.80s on 300' tracks with this engne. when I did run it 300, I had a stock frame, the wrong paddles and the wrong clutch. wth a 180# rider it did 4.10s with a slow 1.65 60'. the price for the engine itself is 2400 plus shipping. that is firm, it is new. I might help on shipping cost a little. the chasiss is like new also. it is 88" wheelbase. the dark purple metallic powdercoat is a 9.9/10 condition. I kept it very well. the chasiss will come with steering to spindles, grips and controls on bars, a yfz bike rear master cylinder (self contained fluid reservoir looks clean and is trick), braided brake cable, front brakes complete with braided cables, fuel tank with dual pingel valve, polished radiator, coolant hoses, motor mounts, motor mount bolts, wheelie bar, black rear fender and black ostrich skin shaved drag seat. price on the chassis is 2500. again I can include extras, this price I firm. please do not waste my time or yours, it is precious. serious inquiries only! can text info and pics, please pm me. thank you! it is not letting me copy and paste the photo links here at this time, sorry! I will work on it now. Edited February 13, 2015 by ONLY2STROKES Quote Link to comment Share on other sites More sharing options...
MacRacer1 Posted February 13, 2015 Report Share Posted February 13, 2015 Get tapatalk, without pictures stuff won't sell. Quote Link to comment Share on other sites More sharing options...
ONLY2STROKES Posted February 13, 2015 Author Report Share Posted February 13, 2015 thanks for the tip! phones not compatible. for some reason I cannot even quote your post. its something with this new PC im betting. ill get it figured out. all the pics I wanted to post are in my classified ad in the complete quads for sale section. I have had no problems in the past getting pics on. 1 Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted February 13, 2015 Report Share Posted February 13, 2015 Don't use Internet Explorer. .. that browser and this site get along as well as skeeter and sobriety. Quote Link to comment Share on other sites More sharing options...
ONLY2STROKES Posted February 13, 2015 Author Report Share Posted February 13, 2015 thanks! maybe I will try to download something else. Quote Link to comment Share on other sites More sharing options...
nastyracing Posted February 13, 2015 Report Share Posted February 13, 2015 How much for pipes once something else goes?2nd time calling dibs. Text me pics I can prolly help you post 732/979/5230 Quote Link to comment Share on other sites More sharing options...
banshee332 Posted February 15, 2015 Report Share Posted February 15, 2015 1 Quote Link to comment Share on other sites More sharing options...
SOUTHTHIRTY Posted February 16, 2015 Report Share Posted February 16, 2015 Says u cant get PM,s Quote Link to comment Share on other sites More sharing options...
ONLY2STROKES Posted February 16, 2015 Author Report Share Posted February 16, 2015 sorry sir! try now. Quote Link to comment Share on other sites More sharing options...
JDively910 Posted February 16, 2015 Report Share Posted February 16, 2015 This bike was super fast will not disappointed very nice bike as a whole 1 Quote Link to comment Share on other sites More sharing options...
ONLY2STROKES Posted February 17, 2015 Author Report Share Posted February 17, 2015 I have the pipes and paddles ready to sell. rdz SB/SF, bare steel, clean up really nice. minor dings in bottom pipe. I ran them before and after the dings, no difference in et's. pipes are out left, stator side. $300 plus shipping paddles are listed in the tires section. 77-78 RO 16 stag extremes, near new. on drag cut 10x10 wheels. $600 obo plus shipping. Quote Link to comment Share on other sites More sharing options...
ONLY2STROKES Posted February 17, 2015 Author Report Share Posted February 17, 2015 also another set of rear tires ready ohtsu radials. like new, maybe 30 pases on them. on new blue label 9x9 wheels $225 plus shipping. can sell front as well. they have aluminum rotors on them. DD spindle mounts for stock banshee style spindles with quality Michelin tires. all like new. they are 10x2 wheels with about a 3.25" wide tire. good for tilled or harder packed tracks. the tires I put on these were about $150 for the set. they will handle extended high speeds and are balanced well. $350 plus shipping. Quote Link to comment Share on other sites More sharing options...
Jduran Posted February 17, 2015 Report Share Posted February 17, 2015 U got pm Quote Link to comment Share on other sites More sharing options...
ONLY2STROKES Posted February 18, 2015 Author Report Share Posted February 18, 2015 pipes are sold Quote Link to comment Share on other sites More sharing options...
ONLY2STROKES Posted February 24, 2015 Author Report Share Posted February 24, 2015 the following is pending sale on Thursday: chassis, axle, front wheels/tires, cdi, coil, seat, rear fender, carrier. the lectrons are also pending sale. the 40.5mm keihin pwks with boyesen bowls for gas are still available. they have a like new cable on them. I am asking $300 plush shipping. the big k&n style filters are also still for sale, $45 plus shipping. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.