ksw390 Posted February 11, 2015 Report Share Posted February 11, 2015 La sleeve 409 monoblock it has been ported Right cylinder has some scratches but it didn't effect compression had 135psi on both sides. Pistons are 68.50mm Carbs are 35mm pwk Hot rods crank and hot rods rods standard size. Hinden racing clutch basket with good clutch Good tranny Cpi out of frame pipes Pro design adjustable timing plate with good stator Also have a complet frame tore down ready for powder coat but that's not happening so it's got to go too. Faded Red race cut plastic all parts for frame including coil,cdi, harness and plus 8 swinger with axel. Good tires and a full set of paddles 350.00 Make me an offer on parts your interested in pm please Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
ksw390 Posted February 11, 2015 Author Report Share Posted February 11, 2015 One of the carb bowls drain is sealed Spot on the clutch basket has a couple teeth chipped Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
ksw390 Posted February 11, 2015 Author Report Share Posted February 11, 2015 Carbs and clutch basket sold Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
ksw390 Posted February 11, 2015 Author Report Share Posted February 11, 2015 500 top end 200 hot rod crank 300 pipes 100 tranny complete 75 timing plate and stator 25 flywheel Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
nastyracing Posted February 11, 2015 Report Share Posted February 11, 2015 Pm sent on flywheel Quote Link to comment Share on other sites More sharing options...
croyboy Posted February 11, 2015 Report Share Posted February 11, 2015 Pm sent Quote Link to comment Share on other sites More sharing options...
ksw390 Posted February 11, 2015 Author Report Share Posted February 11, 2015 I will do top end, crank and pipes all together for one deal 900 Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
ksw390 Posted February 11, 2015 Author Report Share Posted February 11, 2015 Top end sold Timing plate Stator and flywheel sold Pods sold Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
james berry Posted February 19, 2015 Report Share Posted February 19, 2015 how about cases are they for sale? Quote Link to comment Share on other sites More sharing options...
B-EAZY Posted February 25, 2015 Report Share Posted February 25, 2015 Is the crank stock Quote Link to comment Share on other sites More sharing options...
ksw390 Posted February 25, 2015 Author Report Share Posted February 25, 2015 Cases gone Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
ksw390 Posted February 26, 2015 Author Report Share Posted February 26, 2015 All that's left is Crank and trans 200.00 for both Also still have the cpi pipes 300.00 Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
ellison445 Posted February 28, 2015 Report Share Posted February 28, 2015 How much for just the crank?? Pm me All that's left is Crank and trans 200.00 for both Also still have the cpi pipes 300.00 Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
ksw390 Posted February 28, 2015 Author Report Share Posted February 28, 2015 Any other wants before it hits eBay Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
carlos EL PERRO NEGRO Posted March 3, 2015 Report Share Posted March 3, 2015 La sleeve 409 monoblock it has been ported Right cylinder has some scratches but it didn't effect compression had 135psi on both sides. Pistons are 68.50mm Carbs are 35mm pwk Hot rods crank and hot rods rods standard size. Hinden racing clutch basket with good clutch Good tranny Cpi out of frame pipes Pro design adjustable timing plate with good stator Also have a complet frame tore down ready for powder coat but that's not happening so it's got to go too. Faded Red race cut plastic all parts for frame including coil,cdi, harness and plus 8 swinger with axel. Good tires and a full set of paddles 350.00 Make me an offer on parts your interested in pm please Sent from my iPhone using Tapatalk How about your swinger and axel? What kind if axel? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.