Tspiva Posted January 16, 2015 Report Share Posted January 16, 2015 First of all thanks for your time. This will be my second bike. 97banshee Works shocks Chrome everything(handle bars, kick starter, throttle, a arms,and pretty much everything else) +6 chrome swing arm Durablue axle 38 mm lectrons with k&ns Trinity stage iv pipes Cpi drag pipes Dirt wheels and tires Brand new Mohawks and 10 paddle extremes on Douglas rims V force 2reeds Also he has every stock part that came off the bike 4mm hot rods crank Hinson clutch basket Straight cut gears Drag ported Cool head Race fuel Compression is180 psi Seems like a good deal the bike is very very clean, my main question is horsepower, he said it dynoed at 97 horsepower, from my reading on this forum that sounds a bit overboard. The bike was built by prescision in Stockton ca, I can not find any info on them. Any advice on things to checkout would be greatly appreciated, I plan on taking it for a ride and checking compression and fluids. Thanks for the help! Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted January 16, 2015 Report Share Posted January 16, 2015 What cylinders are they? If they are stock ported cylinders it's not gonna make that much power. Quote Link to comment Share on other sites More sharing options...
Tspiva Posted January 16, 2015 Author Report Share Posted January 16, 2015 Stock cylinders Quote Link to comment Share on other sites More sharing options...
BUILDER Posted January 16, 2015 Report Share Posted January 16, 2015 Ask him to see the Dyno sheet? I highly doubt it is close to that number but I would ask for the sheet if he says he does not have it ask him for the persons name at the shop who built it and call them and talk to them. How much is he asking for it? Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted January 17, 2015 Report Share Posted January 17, 2015 hows much is this machine Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted January 17, 2015 Report Share Posted January 17, 2015 If it's got a GOOD port job I can see 97. With a set of GOOD pipes. If it does in fact have straight cuts someone was expecting it to make good power 1 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted January 17, 2015 Report Share Posted January 17, 2015 ^ Quote Link to comment Share on other sites More sharing options...
Tspiva Posted January 17, 2015 Author Report Share Posted January 17, 2015 He spent at least 20 grand building this it is extremely clean I only listed half the stuff.. 3300 Quote Link to comment Share on other sites More sharing options...
Tspiva Posted January 17, 2015 Author Report Share Posted January 17, 2015 Well if it's possible, it prolly is.. He didn't cut any corners ha, i think I'll go get it, thanks guys! Quote Link to comment Share on other sites More sharing options...
Tspiva Posted January 17, 2015 Author Report Share Posted January 17, 2015 Is there anyway to tell if it has straight cut gears without tearing it apart? Quote Link to comment Share on other sites More sharing options...
Tspiva Posted January 17, 2015 Author Report Share Posted January 17, 2015 Called the builder all day never could get them to answer, and I have not figured out how to add pictures yet:/ Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted January 17, 2015 Report Share Posted January 17, 2015 3300 seems like a fair price for what youre getting Quote Link to comment Share on other sites More sharing options...
m671054 Posted January 17, 2015 Report Share Posted January 17, 2015 If this bike is in oakley ca couple thoughts. It might be an old build. Found some posts on pirate 4x4 that referenced a very similar build.do a compression test. If advertised at 180 it should be 180. Could be an old pic and could be worn out. Also joe machado builds some decent stuff and has been around a long time. He is a good local builder. Quote Link to comment Share on other sites More sharing options...
Tspiva Posted January 17, 2015 Author Report Share Posted January 17, 2015 thanks! Quote Link to comment Share on other sites More sharing options...
gusto Posted January 17, 2015 Report Share Posted January 17, 2015 That's a nice looking bike for 3300 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.