trickedcarbine Posted January 11, 2015 Report Share Posted January 11, 2015 Rajuncajun had one done. Look at the 521 super serval in the dyno section. He speaks about the time frame. Albeit his was done in an experimental window. Either way, a build like that isn't a wham bam turn around. Expect it to take 3-6 months Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted January 11, 2015 Report Share Posted January 11, 2015 Cam doesnt fuck around but it is winter so he might have bit of work on at the mo with customers getting work done ready for summer, the quicker you order it the quicker you`ll get it he probably get a lot of emails from dreamers asking about motors that dont follow through... Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted January 11, 2015 Report Share Posted January 11, 2015 Good things come in time especially motors.. Yes your gonna have to wait but it will be worth it. Quality work isn't done in a day Quote Link to comment Share on other sites More sharing options...
shughes11 Posted January 12, 2015 Report Share Posted January 12, 2015 (edited) Okay, that's a little bit longer then what I had in mind. Its all good though, I get it, quality requires time. So what's my next step in pursuing my build? Does cam prefer a down deposit before he starts? I hope he can email me when he gets freed up. I'll give him all the time he needs to build that's no biggie. Edited January 12, 2015 by shughes11 Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted January 12, 2015 Report Share Posted January 12, 2015 Okay, that's a little bit longer then what I had in mind. Its all good though, I get it, quality requires time. So what's my next step in pursuing my build? Does cam prefer a down deposit before he starts? I hope he can email me when he gets freed up. I'll give him all the time he needs to build that's no biggie.3-6 months is pretty good. I waited 9 months for mine. Quote Link to comment Share on other sites More sharing options...
shughes11 Posted January 12, 2015 Report Share Posted January 12, 2015 Did you give him a down payment or he just billed you when it was ready Quote Link to comment Share on other sites More sharing options...
shughes11 Posted January 12, 2015 Report Share Posted January 12, 2015 Reason I ask is to avoid the dreamers wasting his time Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted January 12, 2015 Report Share Posted January 12, 2015 If your really interested give him a call. Leave a message with your name and number and what you want he will get back to you Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted January 12, 2015 Report Share Posted January 12, 2015 Cam did my Serval in just under 2 months. Quote Link to comment Share on other sites More sharing options...
shughes11 Posted January 12, 2015 Report Share Posted January 12, 2015 Nice. I guess it all depends. What length crank Quote Link to comment Share on other sites More sharing options...
shughes11 Posted January 12, 2015 Report Share Posted January 12, 2015 (edited) Rajuncajun had one done. Look at the 521 super serval in the dyno section. He speaks about the time frame. Albeit his was done in an experimental window. Either way, a build like that isn't a wham bam turn around. Expect it to take 3-6 months I couldn't find this discussion. Edited January 12, 2015 by shughes11 Quote Link to comment Share on other sites More sharing options...
shughes11 Posted January 12, 2015 Report Share Posted January 12, 2015 Nice. I guess it all depends. What length crank I meant 4 or 10 mil Quote Link to comment Share on other sites More sharing options...
tfaith08 Posted January 12, 2015 Report Share Posted January 12, 2015 I know he was busy with the winter. I had the money ready to go to him, but he never had the time to call me back, so I went with suspension. He's going to get my business because his work has me convinced. Quote Link to comment Share on other sites More sharing options...
camatv Posted January 12, 2015 Report Share Posted January 12, 2015 about 8 years ago i dyno'd my 350cc " dunner" with hot rods stock stroke crank, 65mm bore wiseco pistons. custom domes, t-5's 35pwk's v-force 2's and my porting it did 70hp and around 45-48ft lbs tq.. not sure why noone seems to be able to get much more out of a 4 mill setup. but yet everyone wants to build the 4 mills and give the lil 350cc no chance to make power.. 3 Quote Link to comment Share on other sites More sharing options...
BUILDER Posted January 12, 2015 Report Share Posted January 12, 2015 Okay, that's a little bit longer then what I had in mind. Its all good though, I get it, quality requires time. So what's my next step in pursuing my build? Does cam prefer a down deposit before he starts? I hope he can email me when he gets freed up. I'll give him all the time he needs to build that's no biggie. Call him that is a much better way to get a response!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.