Tommygunn Posted December 4, 2014 Report Share Posted December 4, 2014 (edited) I think i'm going to sell my Banshee. I just finished it and have taken it to Busco once. It's a lot of fun and i love riding it but there's just nowhere to really open it up around the house other then the road and i cant go to Busco as much as i'd like so i've decided i want to get a 4x4. I bought it about 3 years ago and took it apart down to the frame and had it powder coated. When putting it back together, i upgraded everything. I'll list the main mods that i can think of off hand. Powder coated the frame black, Motor is bored out a little (66mm i believe), Trinity IV head, 19cc domes, Trinity drag ported cylinders, PJ 36mm carbs, k&n pod filters, Durablue +4 adjustable axle, +6 swingarm, +2+2 Alba A-arms, F.A.S.T HD clutch w/ pancake bearing, new tires, wheels, new Rental X ring chain and sprockets, Shear in frame drag pipes, Pro taper bars, New plastics (have old set yellow/black LE), new high flow water pump, chariot foot peg chain tensioner, TM designworks guide, all new bearings, bushings, cables, etc, etc, etc. Asking price is $5000 Located in North Carolina. That's much less then I have into it. Bike is very very very clean. I have the stock LE yellow and black plastics also. Will trade for 4wd Edited December 4, 2014 by Tommygunn Quote Link to comment Share on other sites More sharing options...
Nieskes Posted December 4, 2014 Report Share Posted December 4, 2014 Nice looking bike! I think you had a typo on your price tho. Quote Link to comment Share on other sites More sharing options...
BANSHEEBEEFM2M Posted December 4, 2014 Report Share Posted December 4, 2014 what do you want for the yellow plastic? Quote Link to comment Share on other sites More sharing options...
BUILDER Posted December 5, 2014 Report Share Posted December 5, 2014 Good looking bike fore sure but you are going to get beat up bad on that price. Quote Link to comment Share on other sites More sharing options...
Tommygunn Posted December 5, 2014 Author Report Share Posted December 5, 2014 How much is it worth? I have no idea. I have 7500 in receipts on it Quote Link to comment Share on other sites More sharing options...
Tommygunn Posted December 5, 2014 Author Report Share Posted December 5, 2014 (edited) I'll go through my email and print them all off but for now I paid 2k for the bike in rough shape. Bill of Sale for that 450 for the a arms 300 swingarm 700 pipes 250 wheels 250 tires 380 plastics 150 clutch 180 chain sprockets 1200 in motor including machine work and (bought the pistons and head from a friend who ran them for 2 weekends then changed setup) 100 handlebars 150 powder coat 400 axle 300 carbs That's about 6800 then all new bearings, bushings, tie rod ends, brake lines, pads, etc etc and all the other small stuff that adds up I'd have to look at receipts on would put it around 7500 total invested into this thing. I know I wont get anywhere near that because you never get your money out of anything when you build something, but I wont sell it for 3k. I'll just keep it. I have one full riding day on all these parts at Busco beach. It may be easier for me to just trade it for someone who has a 4wd and wants a banshee Edited December 5, 2014 by Tommygunn Quote Link to comment Share on other sites More sharing options...
Tommygunn Posted December 5, 2014 Author Report Share Posted December 5, 2014 I also ordered a seat cover for it off ebay but it never came and the seller dropped off ebay. Haven't ordered another one yet Quote Link to comment Share on other sites More sharing options...
alexmarq1986 Posted December 5, 2014 Report Share Posted December 5, 2014 Honestly you will have trouble getting 3k for it. If you have so much invested in it just part it out? You paid 2,000 for a crappy non-titled roller? Quote Link to comment Share on other sites More sharing options...
Nieskes Posted December 5, 2014 Report Share Posted December 5, 2014 Motor is bored out a little (66mm i believe) Do you realize thats as far over as you can really go?? Quote Link to comment Share on other sites More sharing options...
Tommygunn Posted December 15, 2014 Author Report Share Posted December 15, 2014 (edited) Honestly you will have trouble getting 3k for it. If you have so much invested in it just part it out? You paid 2,000 for a crappy non-titled roller? It ran when I got it. Other then the yellow/black plastics, Just wasn't in the best shape appearance wise. We don't have atv titles in NC. Is there a list anywhere where I could get an idea for what each part is worth? Or would I need to look up each part? I have thought about parting it out. Do you realize thats as far over as you can really go?? Yeah I can go just a tad more I believe if ever needed but will be maxed out at that point. Edited December 15, 2014 by Tommygunn Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.