StrokedOutShee Posted November 30, 2014 Report Posted November 30, 2014 Hey, I just bought a serval top end kit and it comes with 23cc domes. I was wondering if this would be pump gas for me? I live at 150ft above sea level. I have 94 octane at my local gas station. The temp around here is 10-25 Celsius. I also need jetting help. My mods are 421 Serval 23cc domes 35mm Pwk's Cpi small bore inframes Vforce 4 Reeds Pods What jets should I get also what needle should I be at? Thanks Quote
RadarRacing Posted November 30, 2014 Report Posted November 30, 2014 The domes are between you and whatever engine expert sold them to you and cut them for you. You ordered em. As for jetting, you will probably end up close to the 148 range on mainjet,48 pilot. Start big of course like 158-165 and go down. I have seen guys think they had 35s and they were 39mm pwks. Make sure they are 35s or it will be quite lean with 150ish sized mains. Quote
locogato11283 Posted November 30, 2014 Report Posted November 30, 2014 Where did you get the parts from? Quote
StrokedOutShee Posted December 1, 2014 Author Report Posted December 1, 2014 K and T performance. I'll go ask them. I check the carbs with my micrometer and there 35s. What should my needle be at? Quote
locogato11283 Posted December 1, 2014 Report Posted December 1, 2014 23cc domes should be pump gas domes but we have no idea how they cut them or set anything else up. Have you done a compression check on the motor? Quote
StrokedOutShee Posted December 1, 2014 Author Report Posted December 1, 2014 I am still building the motor. Quote
locogato11283 Posted December 1, 2014 Report Posted December 1, 2014 You mean you're assembling it? Quote
StrokedOutShee Posted December 1, 2014 Author Report Posted December 1, 2014 (edited) Yup. The closest shop that builds banshee motors is like 7000 miles from me... haha Edited December 1, 2014 by StrokedOutShee Quote
sheesfast Posted December 3, 2014 Report Posted December 3, 2014 Hey, I just bought a serval top end kit and it comes with 23cc domes. I was wondering if this would be pump gas for me? I live at 150ft above sea level. I have 94 octane at my local gas station. The temp around here is 10-25 Celsius. I also need jetting help. My mods are 421 Serval 23cc domes 35mm Pwk's Cpi small bore inframes Vforce 4 Reeds Pods What jets should I get also what needle should I be at? Thanks This guys a scammer. Why ask for help with set up if your selling it at the same time? Quote
StrokedOutShee Posted December 3, 2014 Author Report Posted December 3, 2014 (edited) Ffs... It's still the top end is still in the US and I need the money because I just found a great deal on a another banshee and had to jump on it right away and I don't need this now. I'm not a fucking scammer ffs it was a honest mistake. I'm really busy because I have a shit ton of exams and I told my dad to do the shipping. When I asked him about the tracking numbers he said what tracking numbers. So sorry. I shipped them right when I found out that they were no shipped. I sent you the tracking number. I also got the second fastest way too get them there. They screwed me in the ass with the shipping bill buy I just want to let everyone know that I'm not a scammer and this was just a honest mistake! On the side, why did you just start posting this shit on every fucking post instead of talking this through. Edited December 3, 2014 by StrokedOutShee Quote
sheesfast Posted December 3, 2014 Report Posted December 3, 2014 Still a scammer till I see parts or a refund. Enough time has passed. Everybody buy from this guy. Quote
StrokedOutShee Posted December 3, 2014 Author Report Posted December 3, 2014 WE HAVE USPS HERE IN CANADA TOO YOU FUCKING IDOIOT. STOP MAKING YOUR SELF LOOK LIKE A DUMBASS AND GET OFF OF BANSHEEHQ.COM I DONT THINK ANYONE WANTS U HERE! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.