theputz Posted October 28, 2014 Report Share Posted October 28, 2014 Hey guys. You will see in the picture below a missing o ring. Upon disassembly the o ring separated as it was split. Can these be replaced? Thanks.\\ Quote Link to comment Share on other sites More sharing options...
m671054 Posted October 28, 2014 Report Share Posted October 28, 2014 Super glue the ends back together. Just helps the outer race from spinning Quote Link to comment Share on other sites More sharing options...
theputz Posted October 28, 2014 Author Report Share Posted October 28, 2014 I can get replacements but not sure it will slip over crank... anyone have any experience? Quote Link to comment Share on other sites More sharing options...
NYUK Posted October 28, 2014 Report Share Posted October 28, 2014 grainger sells a do it yourself o ring kit, cut them to length, crazy glue together. Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted October 29, 2014 Report Share Posted October 29, 2014 You can buy new orings, and they can be put on with out breaking Quote Link to comment Share on other sites More sharing options...
theputz Posted October 29, 2014 Author Report Share Posted October 29, 2014 You can buy new orings, and they can be put on with out breaking I can't see how it will fit but guess I am going to have to try. What purpose do they serve? Are they really there just to stop the bearing from spinning? Quote Link to comment Share on other sites More sharing options...
m671054 Posted October 29, 2014 Report Share Posted October 29, 2014 Wow. I see that my input was useless. you think it seals something? Really look at the bearing and tell me what would that oring seal that wont go between the balls and races? 1 Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted October 29, 2014 Report Share Posted October 29, 2014 Wow. I see that my input was useless. you think it seals something? Really look at the bearing and tell me what would that oring seal that wont go between the balls and races?But wouldn't all the explosion escape if that wasn't there?? I think it's 100% needed. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted October 29, 2014 Report Share Posted October 29, 2014 ^ not sure if that's legit? But things go bang on the other side of the piston, so not entirely needed if you use sealant or LOCTITE on the outer race so it won't spin. OP, why do you think they won't fit? They come with them correct? They are rubber and stretch. Just picture in your head how you can walk it over the journals and in between the journals so it can stretch up around the rod. It's fine. I'd imagine little Asian ladies in the factory are putting them on in a matter of seconds. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.