pattheriault Posted October 12, 2014 Report Share Posted October 12, 2014 Have anybody successfully installed some heel guard from an other atv on their banshee? most of them will mount to the pegs so that shouldn't be any issue to drill other hole to make it fit. They also usually mount on the frame behind the fender same as our stock one. there must be an atv out there that the rear mount would be close to the same location so that we could use some decent after market heel guard. or worst case would the peg only hold it tight enough? Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted October 12, 2014 Report Share Posted October 12, 2014 Check out the one JDS made for loco. Quote Link to comment Share on other sites More sharing options...
pattheriault Posted October 13, 2014 Author Report Share Posted October 13, 2014 yes I talked with him about it and he didn't seem very interested in making some more Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted October 13, 2014 Report Share Posted October 13, 2014 The IMS are nice Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted October 13, 2014 Report Share Posted October 13, 2014 Are you looking for just heel guards or nerf bars with heel guards? Quote Link to comment Share on other sites More sharing options...
pattheriault Posted October 14, 2014 Author Report Share Posted October 14, 2014 just heel guard only. maybe my best bet would be to get nerf with heelguard as they are available and not too expensive. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.