registered user Posted October 7, 2014 Report Share Posted October 7, 2014 (edited) trying to sort this out before i order more parts. im thinking of a modqaud clutch cover with hinson 8plate springed basket and direct drive/mattoon style lockup. i called modqaud to see if ill have any clearance problems or if everything will fit together fine but the dude didnt sound to sure of himself. just said that it should work. anybody using this same setup that can confirm if these parts fit together fine or if something has to be modified ? also theres quit a few places selling the pancake bearing setup. do i need a certain one or will they all work fine with the 8plate clutch ? Edited October 7, 2014 by registered user Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted October 7, 2014 Report Share Posted October 7, 2014 Not sure on the mod quad cover. But on the pancake bearing make sure to get one that either comes with a second longer adjuster or if it has one bolt make sure the description states it works for 8 plate set ups. Quote Link to comment Share on other sites More sharing options...
Zillaguy Posted October 8, 2014 Report Share Posted October 8, 2014 Ive heard that modquad cover is HEAVY! Get a Chariot pancake bearing. They come with both long and short adjusters. Quote Link to comment Share on other sites More sharing options...
registered user Posted October 8, 2014 Author Report Share Posted October 8, 2014 (edited) ya i seen the chariot pancake bearing unit earlier today. ill probly just get that one. has 2 different bolts and appears allitle more stout than some the other pancake units 1 lb extra weight meens little to me as i race only for fun Edited October 8, 2014 by registered user Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted October 8, 2014 Report Share Posted October 8, 2014 Direct drive or Mattoon. I've yet to see a modquad with quality higher than those two. Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted October 8, 2014 Report Share Posted October 8, 2014 Buy the Mattoon cover/lockup combo off ebay. Fuck all that other junk Quote Link to comment Share on other sites More sharing options...
registered user Posted October 9, 2014 Author Report Share Posted October 9, 2014 (edited) $600 mattoon billet cover is out of the question. their other cover appears to be just a modified oem cover direct drive cover is a cast unit with some reinforced areas from what i understand. this wouldnt be a bad choice. problem is its nearly the same money as the billet modqaud cover. thats why i was asking about modqaud. never bought any of their stuff so i didnt know what the qaulity is like or if the direct drive lockup will fit in there with 8plate clutch Edited October 9, 2014 by registered user Quote Link to comment Share on other sites More sharing options...
J-Madd Posted October 9, 2014 Report Share Posted October 9, 2014 I would think it would fit. Quote Link to comment Share on other sites More sharing options...
Nightmare Posted October 9, 2014 Report Share Posted October 9, 2014 I think it would to. I'm holding a modquad cover in my hand and it seems deeper than the direct drive unit. Like said above, it is just a modded stock cover. And yes, it seems heavy imo. Quote Link to comment Share on other sites More sharing options...
registered user Posted October 9, 2014 Author Report Share Posted October 9, 2014 i think ill just go with modqaud since its basically same price as the direct drive cast unit. if by chance it wont work with 8plate hinson basket and direct drive lockout ill modify the cover or send the damn thing back and get a different cover Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted October 9, 2014 Report Share Posted October 9, 2014 Just get the mattoon and be sure Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted October 9, 2014 Report Share Posted October 9, 2014 Just get the mattoon and be sure Quote Link to comment Share on other sites More sharing options...
registered user Posted October 11, 2014 Author Report Share Posted October 11, 2014 anybody know anything about this clutch cover ? appears very similar to modqaud but theres no mention of modqaud in the description. in one of his other cover auctions it appears he might even be using a modqaud image but he says its a protech brand. http://www.ebay.com/itm/PROTECH-BANSHEE-THE-MOST-BEAUTIFUL-SICK-ATV-CLUTCH-COVER-LOCKOUT-BLACK-ANODIZED-/131314151969?pt=Motors_ATV_Parts_Accessories&hash=item1e92eef221&vxp=mtr Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted October 12, 2014 Report Share Posted October 12, 2014 Those look nice. I've been looking at those for a while now. Not sure I've heard any thing about them though. Quote Link to comment Share on other sites More sharing options...
registered user Posted October 12, 2014 Author Report Share Posted October 12, 2014 ya it looks nice. i emailed the dude because in one of the pics of the polished cover im pretty sure its the exact pic on the modqaud site so i asked if hes associated with modqaud but he hasnt replied back yet. he told me $450 shipped with no lockout for the polished cover. if it is a modqaud cover they only want $340 on their site. maybe its a different cover but its strange the pic looks identical. and it appears photochopped as well. why not show a pic of the actual product ? ill let you know what i find out because this ebay dude seems kind of fishy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.