chris_sims1981 Posted September 29, 2014 Report Share Posted September 29, 2014 Would a stock crank with a 115 rod be a 2 mil stroker? 1 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted September 29, 2014 Report Share Posted September 29, 2014 No, direct whoever said that to your closest middle finger. Quote Link to comment Share on other sites More sharing options...
2strokes4u Posted September 29, 2014 Report Share Posted September 29, 2014 Might be a dumb question but what does the rod length determine? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted September 29, 2014 Report Share Posted September 29, 2014 Regular rod length is 110mm center of eye to center of eye. By adding rods that are 5mm longer you take stress off the exhaust side of the bore and piston by having less angle. Doing so requires a piston with different wrist pin height so that the piston isn't an additional 5mm out of the bore. Quote Link to comment Share on other sites More sharing options...
2strokes4u Posted September 30, 2014 Report Share Posted September 30, 2014 Thanks for the info tricked and zilla Quote Link to comment Share on other sites More sharing options...
Brian Mcgowan Posted October 2, 2014 Report Share Posted October 2, 2014 funny Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.