91coupemike Posted September 29, 2014 Author Report Share Posted September 29, 2014 Shift lever eccentric bolt is snapped off. What causes that to happen? To much force shifting? Ordered all the stuff to rebuild that part of it. A pro shift and a mull shift star. Hopefully it'll be good to go for a while. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted September 29, 2014 Report Share Posted September 29, 2014 It's basically an old bolt. Think of how hard that gear lever has been smashed down over and over through the years. The thing you feel when it stops is that bolt. Get the old one out and grab a new one through a site sponsor. I'd say just call Jeff at fast and get a modded shaft and the new eccentric stuff. He mods the shaft for peanuts if he even does charge ya. Quote Link to comment Share on other sites More sharing options...
91coupemike Posted September 30, 2014 Author Report Share Posted September 30, 2014 Can you explain the modded shift shaft ? What difference / feel does it make compared to stock? Quote Link to comment Share on other sites More sharing options...
Nightmare Posted September 30, 2014 Report Share Posted September 30, 2014 Doesn't matter. Motor should've puked out whatever it doesn't need through the vent after it's first ride.True Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted September 30, 2014 Report Share Posted September 30, 2014 Can you explain the modded shift shaft ? What difference / feel does it make compared to stock?It adds just a touch more travel to the shifter so you can get a more positive feel as it rolls the shift star/drum over to the next gear. Stock shaft Modded shaft Stock and modded shift star as well Sent from my iPhone using Tapatalk - now Free Quote Link to comment Share on other sites More sharing options...
91coupemike Posted September 30, 2014 Author Report Share Posted September 30, 2014 Hmm seems like it wouldn't matter much on a modded star? Hmm I'll wait on the shift shaft mod, all see how I like the pro shift and mull star first Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted September 30, 2014 Report Share Posted September 30, 2014 When Jeff mods the shaft he also tweaks it so the pawl engages the pins a little further. That caused problems on mine when I used the Mull star since it has longer pins. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted September 30, 2014 Report Share Posted September 30, 2014 Ya. That took some fine tuning on mine as well. The mull star seems to get along with the really soft detent spring with the shift pro. 1 Quote Link to comment Share on other sites More sharing options...
91coupemike Posted September 30, 2014 Author Report Share Posted September 30, 2014 Sweet, I was debating using the stock/stiffer spring with it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.