Stone MXshee Posted October 27, 2014 Author Report Share Posted October 27, 2014 I have the dyno charts on my phone. Its not allowing me to upload. I'm not downloading that photo bucket bs either. If someone has a number that can upload pics, I'll send the sheets over. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 27, 2014 Report Share Posted October 27, 2014 You can upload straight to Tapatalk. Answer my other questions. Quote Link to comment Share on other sites More sharing options...
Stone MXshee Posted October 27, 2014 Author Report Share Posted October 27, 2014 A Powersports shop near me. I tried tapatalk. Said the image is to big Quote Link to comment Share on other sites More sharing options...
Stone_MXshee Posted October 27, 2014 Report Share Posted October 27, 2014 [/img] Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 27, 2014 Report Share Posted October 27, 2014 What's the name of the shop and who there ran the dyno? Quote Link to comment Share on other sites More sharing options...
Stone MXshee Posted October 27, 2014 Author Report Share Posted October 27, 2014 I gave a pic to bennett131 Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 27, 2014 Report Share Posted October 27, 2014 Why won't you answer the questions? Quote Link to comment Share on other sites More sharing options...
Stone MXshee Posted October 27, 2014 Author Report Share Posted October 27, 2014 Laberons powersports. Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted October 27, 2014 Report Share Posted October 27, 2014 The pic never came through I got it but it won't open. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 27, 2014 Report Share Posted October 27, 2014 The pic never came through I got it but it won't open. Haha of course it didn't. Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted October 27, 2014 Report Share Posted October 27, 2014 Wow. Stonedumbfuck, have you called ECATV and apologized yet? Further, have you publicly apologized here on BansheeHQ? You're a real piece of work. Fucking idiot. I called this from the minute this dumb fuck posted. I wouldnt call and apologize to eca. The domes i took out of stones motor were some of the worst cuts ive seen, chatter marks from the cutter, the squish band and chamber are as rough as running your finger nail over a fine tooth comb, not to mention the .035/.036'' squish with 8.5mm wide band. The porting.... the intakes are clean and even (but over done imo), the exhausts are very aggressive in size and shape and not the same from L to R cylinder. I still have to toss numbers around and figure out what could be done to make them run to there potential. but at very least he would need new domes cut. Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted October 27, 2014 Report Share Posted October 27, 2014 oh, the domes that stone sent in with the motor are the same ones he got back, but re-cut (rough as fuck as i said). now when you cut a stock stroke dome and make it into a stroker dome, you of course cut the step of the dome deeper and the chamber deeper (to keep it simple). now what happens when you make those cuts and screw a spark plug in?... the spark plugs hangs into the dome chamber 3-4 threads worth. Now ive cut domes like this for myself, before have the cnc available to make blanks and domes however they need be, and you must run copper washers under the plugs so when screwed in they sit flush with the chamber. stone was charged $75 for new domes, not to re cut the same domes and fuck them up in the process. Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted October 27, 2014 Report Share Posted October 27, 2014 196/132 from what i measured last night. Quote Link to comment Share on other sites More sharing options...
Stone MXshee Posted October 27, 2014 Author Report Share Posted October 27, 2014 If anyone wants to see the dyno chart, I had to make a new thread to upload it. Its 4mil ECA dyno Quote Link to comment Share on other sites More sharing options...
gusto Posted October 27, 2014 Report Share Posted October 27, 2014 BHP, your a good guy helping out this new owner. Props to you. Stone , sit back and soak up all you can, great learning experience working with this guy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.