KAMIKAZE Posted September 5, 2014 Report Share Posted September 5, 2014 OK so I currently have a fireball racing billet intake and pwk33s Will pwk35s fit in the same intake boots ? Are pwk35s the best size for the 421 serval ? I ask because some sites advertise intakes for 26-35mm or 34-39 ect Is it a case of buying new boots or is the whole intake larger or will they just fit straight in Just looking for a straight answer as seems to be a bit of conflicting info when I search around Quote Link to comment Share on other sites More sharing options...
jriffe23 Posted September 5, 2014 Report Share Posted September 5, 2014 with a 421, atleast if i had one, it would have pwk 39s on it. But 35s are good by all means, regarding the intake boots i believe they would fit because i have also seen the boots advertised like you first stated Quote Link to comment Share on other sites More sharing options...
hp2000 Posted September 5, 2014 Report Share Posted September 5, 2014 33 & 35 pwk use the same boots. The best size carb on that motor will be preference as the larger the Carb the more mid you will loose but gain top end. Plenty of guys including myself are running 35's on 421 motors with great all around results. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Nightmare Posted September 5, 2014 Report Share Posted September 5, 2014 I'm running 35's on my 350, but its special. Quote Link to comment Share on other sites More sharing options...
Finch Posted September 5, 2014 Report Share Posted September 5, 2014 Ben most run 35s on serval same size boots i had 35s on that motor Quote Link to comment Share on other sites More sharing options...
KAMIKAZE Posted September 5, 2014 Author Report Share Posted September 5, 2014 And that settles that Thanks a lot guys Best place to order new carbs from ? Quote Link to comment Share on other sites More sharing options...
Starwriter Posted September 5, 2014 Report Share Posted September 5, 2014 33 and 35 PWK are the exact same carb, except the 33 is not bored out as far. If you look at the 33, you will see that it is not bored through the center. This is so the needle jet is still at the bottom of the bore. Quote Link to comment Share on other sites More sharing options...
KAMIKAZE Posted September 5, 2014 Author Report Share Posted September 5, 2014 So is it a worthwhile upgrade ? Quote Link to comment Share on other sites More sharing options...
possum Posted September 5, 2014 Report Share Posted September 5, 2014 33 and 35 PWK are the exact same carb, except the 33 is not bored out as far. If you look at the 33, you will see that it is not bored through the center. This is so the needle jet is still at the bottom of the bore. Bingo 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.