theredscout Posted September 3, 2014 Report Share Posted September 3, 2014 Will the rebuild kit with the spring/ball bearing fix this??? DoI need to use grease around spring and bearing? Thanks!! Quote Link to comment Share on other sites More sharing options...
Factory350 Posted September 3, 2014 Report Share Posted September 3, 2014 Spray it with WD40 really good and get it free. You can continue doing that multiple times or rebuild it. If it doesn't rattle just keep it lubed up. Quote Link to comment Share on other sites More sharing options...
MoronG Posted September 5, 2014 Report Share Posted September 5, 2014 Hope u didn't seize it like me man.. Quote Link to comment Share on other sites More sharing options...
Coupelx Posted September 5, 2014 Report Share Posted September 5, 2014 Take it apart and pack with grease. Quote Link to comment Share on other sites More sharing options...
oh3shee Posted September 6, 2014 Report Share Posted September 6, 2014 I was having the same problem last week. I had to put a wrench on mine to twist it out. I bought a rebuild kit off ebay for about $5. I needed a punch screw driver to get the screw out cause I stripped it trying by hand. After I rebuilt, better than brand new. No rattle. Twists right out and after I kick it, it folds right in on its own. Its well worth the $5 and 10 minutes it took to rebuild it. Quote Link to comment Share on other sites More sharing options...
ETR174 Posted September 7, 2014 Report Share Posted September 7, 2014 Can you twist it the other way towards the motor? You can put the little levers on the wrong way. I did this once and checked it again just as I was about to put it back on my bike and it was on the wrong way. Quote Link to comment Share on other sites More sharing options...
Nieskes Posted September 7, 2014 Report Share Posted September 7, 2014 Can you twist it the other way towards the motor? You can put the little levers on the wrong way. I did this once and checked it again just as I was about to put it back on my bike and it was on the wrong way.duhwhat? Quote Link to comment Share on other sites More sharing options...
ETR174 Posted September 7, 2014 Report Share Posted September 7, 2014 duhwhat?The top swivel part can be put on wrong. There is a stop on that part so it won't go out more and you put it on wrong it will swivel open the wrong way. Quote Link to comment Share on other sites More sharing options...
Nieskes Posted September 7, 2014 Report Share Posted September 7, 2014 I guess that could happen if you are a moron. Quote Link to comment Share on other sites More sharing options...
ETR174 Posted September 7, 2014 Report Share Posted September 7, 2014 I guess that could happen if you are a moron.Yup pretty much Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.