banshee35027 Posted August 18, 2014 Report Share Posted August 18, 2014 Has anyone successfully paint their stock rims? If so how? I want to do mine black. And no I rather not plastic dip. Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted August 18, 2014 Report Share Posted August 18, 2014 No matter what kind of paint you use, if you hit something it will chip. Pc doesn't hold up too bad though. Quote Link to comment Share on other sites More sharing options...
Burke Posted August 18, 2014 Report Share Posted August 18, 2014 its going to chip like hell, so you might as well just rattlecan them so your touchups match Quote Link to comment Share on other sites More sharing options...
TroyBrock Posted August 18, 2014 Report Share Posted August 18, 2014 I painted mine with just a regular can of spray paint. Did 2 coats of primer and 4 coats of white and they came out okay. It's simple to take the paint off too. Quote Link to comment Share on other sites More sharing options...
banshee35027 Posted August 18, 2014 Author Report Share Posted August 18, 2014 Any spray cab paint u would recommend that sticks pretty good? Quote Link to comment Share on other sites More sharing options...
Drk Rider Posted August 18, 2014 Report Share Posted August 18, 2014 The brand of paint is not as important as the prep work. the best prep would be to have them sand blasted then seal, prime, paint. Second would be a scotchbrite and rough up every nook and crannie. Then clean with dawn dish soap and water, use a self etching primer, paint. I reccomend automotive single stage, if you want rattle can then duplicolor. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.