woofy Posted August 10, 2014 Report Posted August 10, 2014 03 stock stroke and bore ported cylinders,cut head,boyesen reed petals stock cages, stock carbs,k&n pods, have 360mains,27.5 pilots air screw 2 1/2 turns out needle on 4th clip, Toomey needles. Put new plugs warmed up and ripped down road shut down full throttle. Its lean as hell. Seems like 360s would b way big. I'm outside of Detroit. Any opinions? Thanks in advance Quote
woofy Posted August 10, 2014 Author Report Posted August 10, 2014 Can't upload pics. Plugs are a off white not close to brown. Maybe run it more b4 chk plugs???? Quote
BANSHEE HP Posted August 10, 2014 Report Posted August 10, 2014 you changed pipes? if not was it running in tune before the new plugs? what plugs? Quote
bluebanshee98 Posted August 10, 2014 Report Posted August 10, 2014 360 main is big in these summer temps IMO sounds like you have a air leak. Should be around a 330-340 main since it's ported. New intake boots and gaskets with yamabond on them might fix the issue. How old are the intake boots? Have they ever been replaced? Did you do a leakdown test? Post some pics of the plug so we can see it. Quote
special06shee Posted August 11, 2014 Report Posted August 11, 2014 Where are you reading your plug at? Are you actually cutting the threads of plug and reading the burn ring at the base? Or are you just looking at the porcelain in general? This pic is from another thread but its just a reference for ya. Quote
trickedcarbine Posted August 11, 2014 Report Posted August 11, 2014 Where outside Detroit are ya? I'm not working for a few weeks and am bored as hell. I'm in right between Waterford and White lake. Let me know if you want some help sorting it out. Quote
woofy Posted August 11, 2014 Author Report Posted August 11, 2014 I didn't do leakdown test. Intake boots are original stock. Didn't do plug chop only plugs I had lol. I'm working now. Gonna mess with it this evening. I'm leaving for silver lake Wed night. If I can't get it tuned I'm jus putting t5s back on. Couldn't post pics. I'm in Belleville. Basically 94 and 275 I'm ten min from detroit metro airport. Quote
woofy Posted August 11, 2014 Author Report Posted August 11, 2014 Trickedcarbine thanks. Was thinking airleak. But had t5s with 27.5 and 280s in it and was rich. Idk if I'll have time this wk. Jus painted my mustang over wkend been crazy busy lately. But next wk would love to try to sort it out. Your probably bout 45min to a hour from me. Hmu 734 320-7785. Thanks everyone for help greatly appreciated. I'll chk back later tonight Quote
Zillaguy Posted August 12, 2014 Report Posted August 12, 2014 Sounds like you have an air leak, that jetting is way off for your mods...... I just re-jetted for the warmer temps and am at 32.5 pilots and 340 mains (ported 4mill on pump fuel)... I'm not too far from you.... I'm in Westland, Mich. Ave and Venoy area... If you can't get it worked out, let me know I can help you. Quote
woofy Posted August 12, 2014 Author Report Posted August 12, 2014 Hey zillaguy!! Yeah ur bout 20min from me. I'm leaving for silver lake tomorrow bout 6ish. I work till 4 today. What's ur schedule looking like? Have sum buddy's to race this wkend. Would love to have CPI s on and ripping. Tonight I can bring it by. Lmn 734-320-7785 Tony. And what kinda $ you talking?? Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.