Banshee631man Posted July 31, 2014 Report Share Posted July 31, 2014 I have a 2000 banshee not very atv savy, I'm pretty sure it may be the spring or star or shift shaft.. Is it easy to install.. What other things may it be, it won't click when it shifts gears . any help is greatly appreciated. Am I just better off getting raped from a shop, I'm new here so what's up everyone! Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted July 31, 2014 Report Share Posted July 31, 2014 I have a 2000 banshee not very atv savy, I'm pretty sure it may be the spring or star or shift shaft.. Is it easy to install.. What other things may it be, it won't click when it shifts gears . any help is greatly appreciated. Am I just better off getting raped from a shop, I'm new here so what's up everyone! The latch end of the shift shaft may have bent and popped off the shift star. If you are going to own a Banshee….the days of "Not being too ATV savvy" are about over. LOL Get yourself a CLYMERS manual and start with pulling that clutch cover off……... 1 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted July 31, 2014 Report Share Posted July 31, 2014 Buy a manual and pull the clutch cover off. 1 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted July 31, 2014 Report Share Posted July 31, 2014 Wait, you're not just trying to get it to go through all 6 gears while the machine is just sitting are ya? 1 Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted July 31, 2014 Report Share Posted July 31, 2014 Wait, you're not just trying to get it to go through all 6 gears while the machine is just sitting are ya? Good catch! ^^^ Rock the bike chief. The gears have to MOVE to complete the shifting Quote Link to comment Share on other sites More sharing options...
Banshee631man Posted July 31, 2014 Author Report Share Posted July 31, 2014 Yeah I was, shouldn't you hear the click anyway or is it different with a dirt bike.. With my bike I could just pull the shifter up n go through all gears while it's just sitting there and hear the clicks Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted July 31, 2014 Report Share Posted July 31, 2014 no man.....totally different. you have to move the bike at least by hand to get ALL the gears to engage. otherwise you can ususally just get first, neutral and 2nd......sometimes it will hop into third without moving. but if you rotate the rear tires (by just pushing the bike forward and backwards) it will allow the gears to move just enough to all them to pop into all gears. on a side note.....why are you trying to run it through all 6 gears while the engine is off and still in the frame? Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted September 15, 2014 Report Share Posted September 15, 2014 lmao damn these fellas saved you a raping frrom the shop 1 Quote Link to comment Share on other sites More sharing options...
Banshee631man Posted September 15, 2014 Author Report Share Posted September 15, 2014 Yeah they did.. I'm just finally able to ride hopefully Oct, I just had, 2 major surgeries I'm in not right now.. It would of been easier if I could move the quad but I had both feet operated on.. Sry for the dumb question Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted September 15, 2014 Report Share Posted September 15, 2014 its all good Quote Link to comment Share on other sites More sharing options...
Banshee631man Posted September 15, 2014 Author Report Share Posted September 15, 2014 its all goodThank you.. For my other situation, how do I bend the hoop back in place? Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted September 16, 2014 Report Share Posted September 16, 2014 have you checked to see if its actually bent?...some heat and pull it back into place i guess bar clamp doesnt look very off center when looking at it from the rear and lining it up with the fuel cap, take the hood off and have a good look Quote Link to comment Share on other sites More sharing options...
Banshee631man Posted September 16, 2014 Author Report Share Posted September 16, 2014 Okay thank you so much, I really appreciate your help Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted September 16, 2014 Report Share Posted September 16, 2014 no biggee, lots peeps here will help you with anything concerning banshees if your willing to listen welcome to BHQ Quote Link to comment Share on other sites More sharing options...
Banshee631man Posted September 16, 2014 Author Report Share Posted September 16, 2014 no biggee, lots peeps here will help you with anything concerning banshees if your willing to listen welcome to BHQ I'm definitely one to listen, I'm more of a dirt bike guy.. I'm just learning about the quads and my banshee now.. I'm gonna take the hood off tomorrow n see what's going on Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.