BurnsideBanshee Posted July 29, 2014 Report Share Posted July 29, 2014 My buddy finally found a shee in the area for cheap.. been giving it a go over, has issues.. Guy said that he had ridden this thing the previous weekend, Bullshit obviously but we found the main issue, whats your opinions on possible secondary problems from the main issue we have found so far. Guy said it wouldn't kick start and needed rebuilt soon but that he was able to roll start it.. Just wondering what all that right side piston could have done.. haven't found any more pieces to it yet. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted July 29, 2014 Report Share Posted July 29, 2014 Eww.... Well, it was only 800 bucks. Every thing looks to be there. So tear those cases down and start over. It'll be worth it. Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted July 29, 2014 Report Share Posted July 29, 2014 I'd say the jetting is wrong too since it looks like it got hot as fuck. Quote Link to comment Share on other sites More sharing options...
984mmshee Posted July 29, 2014 Report Share Posted July 29, 2014 I would say jetting or major airleak The last banshee i picked up had no base gaskets under the cylinders they had silicon. And it looked just like that and both piston skirts were broke. Tear it down rebuild it right and you will be happy with it, and for 800 its worth it. 1 Quote Link to comment Share on other sites More sharing options...
BurnsideBanshee Posted July 29, 2014 Author Report Share Posted July 29, 2014 Well going off the guys word that he roll started it we pulled it around trying to get it started, right side pipes got insanely hot, Thanks for the opinions guys, Bancheeta should chime in at some point its his shee now and we will continue to tear it down. EDIT Air plane mechanic we went to school with commented on these pics on fb... says there fine and that passenger planes have even bigger holes and even more of the pistons missing all the time? So the train it is.. Quote Link to comment Share on other sites More sharing options...
BUILDER Posted July 29, 2014 Report Share Posted July 29, 2014 Holy shit what did you guys use to get that right side cylinder off??? Looks like you took a chisel and a hammer to it The pieces probably went out the exhaust that happens. You pulls the silencers apart you will probably find them. It needs a complete tear down inspect the crank and replace if needed then put the motor back together Quote Link to comment Share on other sites More sharing options...
BurnsideBanshee Posted July 29, 2014 Author Report Share Posted July 29, 2014 Was like that when we removed the domes, Dont know what the guy had done.. He has removed alo and just kinda fucked the wire harness and most everything else has randoms bolts and screw all in it. But we are working to get it running. Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted July 29, 2014 Report Share Posted July 29, 2014 Well going off the guys word that he roll started it we pulled it around trying to get it started, right side pipes got insanely hot, Thanks for the opinions guys, Bancheeta should chime in at some point its his shee now and we will continue to tear it down. EDIT Air plane mechanic we went to school with commented on these pics on fb... says there fine and that passenger planes have even bigger holes and even more of the pistons missing all the time? So the train it is.. Idk the train is safe either lol I've heard of people cutting out 3 foot section of track just for the hell of it. Quote Link to comment Share on other sites More sharing options...
red96shee Posted July 30, 2014 Report Share Posted July 30, 2014 There not cutting it out just for the hell of it its for the underground railroad. Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted July 30, 2014 Report Share Posted July 30, 2014 Except they are smuggling in Mexicans. Quote Link to comment Share on other sites More sharing options...
Burnsidebancheata Posted July 30, 2014 Report Share Posted July 30, 2014 Yeah, cheap banshee but we have been working on it day and night, and plan to for a bit..What opinions can I get to have this thing up and going by September? If they have not already been giving. Thanks you guys. New to Shee's but plan for that to change real soon.. Burnsidebanshee has been helping me from day uno!!!! Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted July 30, 2014 Report Share Posted July 30, 2014 If you need any stock parts let me know I have a lot of stuff laying around. 1 Quote Link to comment Share on other sites More sharing options...
Burnsidebancheata Posted July 30, 2014 Report Share Posted July 30, 2014 That would be helpful. Depending on what I need.. I am off tomorrow, so I will start breaking the rest down to look at it.. I will keep you posted. Thanks. Quote Link to comment Share on other sites More sharing options...
Burnsidebancheata Posted July 31, 2014 Report Share Posted July 31, 2014 Shit I am trying to get enough money to fix what I have. Sent from my Desire HD using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.