snowman403 Posted July 19, 2014 Report Posted July 19, 2014 ok here we go guy i have an 06 banshee she treated me very well the last few years i had gucked up the carbs so she would run soo i ripped em apart and cleaned em twice got it to start up now but she is back fireing and doesnt wanna stay gooing could it be my jetting or what should i have the carbs set at or is is something else the ol mods she has is fmf and recently just through the k and n air filter on Quote
oldskool Posted July 19, 2014 Report Posted July 19, 2014 Could you please ask one question at a time? I am slow and can't figure all that out. BTW welcome 1 Quote
Larry's Shee Posted July 20, 2014 Report Posted July 20, 2014 Did you actually take them apart and clean and inspect each jet, or did you give it a quick douche with a spray can? Did you blow compressed air through all the holes? Can yo see through the pilot jet? Are holes on emulsion tubes clear? Float bowls on correct carb? They are different. Set float level? Choke tube in place? Was it rejetted for pipes? Air filter? Do you have good spark? New plugs? How long has it set? Did it run 100% the last time it did run? What is your current jetting? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.