screamin'twin Posted November 17, 2003 Report Share Posted November 17, 2003 00 banshee pro desighn air intake with foam filter no airbox lid, carbon fiber reeds, pro x pistons 10 over port and polish by East Coast atv, Pro Des. cool head 22 cc domes running stock pipes and gearing with a 140 lb rider my friend just bought it hes looking for a rough top speed est. Quote Link to comment Share on other sites More sharing options...
fixitrod Posted November 17, 2003 Report Share Posted November 17, 2003 with stock pipes and stock gearing I'm guessing 75. You should have the power to push taller gearing if you want more top speed. Also, you'll gain rpms by using after market pipes. More revolutions will make the tires turn more on top end yeilding more top speed also. Quote Link to comment Share on other sites More sharing options...
gurny Posted November 21, 2003 Report Share Posted November 21, 2003 get pipes that will make a HUGE DIFFERENCE. Quote Link to comment Share on other sites More sharing options...
MULLET~BOY Posted November 21, 2003 Report Share Posted November 21, 2003 i duno but when i dynod my biek stock gearing it said 70mph Quote Link to comment Share on other sites More sharing options...
Blue Duece Posted November 21, 2003 Report Share Posted November 21, 2003 72? Quote Link to comment Share on other sites More sharing options...
erbilabuc Posted November 21, 2003 Report Share Posted November 21, 2003 should be either 71 or 72, with enough power and correct gearing you can get higher. I have had mine up to 87 mph on 16/41 running 93 octane Quote Link to comment Share on other sites More sharing options...
fixitrod Posted November 21, 2003 Report Share Posted November 21, 2003 get pipes that will make a HUGE DIFFERENCE. Nah, they'll just get you there way faster. You may gain a little top speed because the pipes allow the engine to get a little higher rpm. It all revolutions. Quote Link to comment Share on other sites More sharing options...
wheeleymaster99 Posted November 24, 2003 Report Share Posted November 24, 2003 i think a stock banshees top sepped is some were around 72 and you have quite a bit done to it so i would say maby around 75 Quote Link to comment Share on other sites More sharing options...
tithead Posted December 6, 2003 Report Share Posted December 6, 2003 alrighty then. i thing your banshee will do a bit more than that. iv got a `98 banshee with paul turner exhausts and cans, nerfs, and all that original crap and extras which i think will be a bit heavier than yours and i get 120mph out of the old hawg. you need to go and get your machine de-restricted from your machanic mates then come back and tell us what you think. Quote Link to comment Share on other sites More sharing options...
SICK BOY Posted December 6, 2003 Report Share Posted December 6, 2003 Tithead your banshee does 120mph?What the hell you got done to it? Quote Link to comment Share on other sites More sharing options...
Blue Duece Posted December 6, 2003 Report Share Posted December 6, 2003 i get 120mph out of the old hawg. does de-restricted mean add 50horse power and gear taller, around mmmm 12 teeth 3 of them being in front? or is 120mph where you live, 80mph where i live? Quote Link to comment Share on other sites More sharing options...
NYUK Posted December 6, 2003 Report Share Posted December 6, 2003 120kph? or mph? 120 is a full out alky dragster. Quote Link to comment Share on other sites More sharing options...
Nightrider Posted December 6, 2003 Report Share Posted December 6, 2003 With 15/41 I managed 82mph in the 1/4 mile with PC pipes.I think it was around 14.7 or 14.8 et. Quote Link to comment Share on other sites More sharing options...
fixitrod Posted December 6, 2003 Report Share Posted December 6, 2003 If he has stock sized tires and gearing he had to turn 15,000 rpms.....bullshit. It's all realitive to rpms wether it be at the tranny, motor, wheel, sprocket size, etc... Quote Link to comment Share on other sites More sharing options...
NYUK Posted December 6, 2003 Report Share Posted December 6, 2003 people have no idea what it takes to go 100 mph on a quad let alone 120. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.