ETR174 Posted July 9, 2014 Report Share Posted July 9, 2014 Going to the dunes in a couple of weeks and I still need help with jetting. I got FMF Fatty pipes, stock silencers, Boyesen Power Reeds on stock cages, Bored .30 over, and 4" pod filters on stock carbs (no airbox). Quote Link to comment Share on other sites More sharing options...
ETR174 Posted July 9, 2014 Author Report Share Posted July 9, 2014 Forgot to say elevation is at 600ft above sea level and I'm running stock needle and NO PORTING JOB Quote Link to comment Share on other sites More sharing options...
wayne_smith97 Posted July 10, 2014 Report Share Posted July 10, 2014 Try a 300 main and 27.5 pilot Quote Link to comment Share on other sites More sharing options...
Nightmare Posted July 10, 2014 Report Share Posted July 10, 2014 Try a 300 main and 27.5 pilotx2 Sent from my XT1080 using Tapatalk Quote Link to comment Share on other sites More sharing options...
ETR174 Posted July 10, 2014 Author Report Share Posted July 10, 2014 Ok I just ordered a rebuild kit with 300's in them, I got 27.5 pilots already Quote Link to comment Share on other sites More sharing options...
ETR174 Posted July 12, 2014 Author Report Share Posted July 12, 2014 The order somehow got canceled so I went to a place near me and got 2 Shindy rebuild kits with 200 jets. I put a new needle on and I ran my 270 that I had before on the 2nd needle position and it still ran rich enough to where oil was leaking in all the exhaust joints except for the exhaust port on the cylinder into the headers. Any more suggestions? Next main size down is 200 so I'm thinking about running that with the 3rd, 4th, and 5th position. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.