Michaels 04 Banshee Posted July 21, 2014 Author Report Share Posted July 21, 2014 Ok I found that my crank seal was basically pushed out of its seat causing oil to leak through to the cylinder. So all new gaskets and oil seals were installed. I got it all put back together and it works! Lol The smoke is minimal now and will prob stop once the leftover oil is burned out of the pipe. Thanks for the help. Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted July 21, 2014 Report Share Posted July 21, 2014 Not often someone comes back after solution is reached Quote Link to comment Share on other sites More sharing options...
Michaels 04 Banshee Posted July 22, 2014 Author Report Share Posted July 22, 2014 Well I am sure I will be back sooner or later. Hopefully later. So I figured it would help if i post results. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted July 22, 2014 Report Share Posted July 22, 2014 RTV on the key way? Quote Link to comment Share on other sites More sharing options...
Skitso559 Posted July 26, 2014 Report Share Posted July 26, 2014 I'm surprised nobody's told you 100 psi is kind of low should do top end rebuild before it does more damage Quote Link to comment Share on other sites More sharing options...
Michaels 04 Banshee Posted July 28, 2014 Author Report Share Posted July 28, 2014 Can i just replace the rings or should i relace the pistons too? The pistons looked really good when i had them out for the seal replacement. Quote Link to comment Share on other sites More sharing options...
Surfrjag Posted July 28, 2014 Report Share Posted July 28, 2014 the only way to know is if you measure the piston to cylinder clearance Quote Link to comment Share on other sites More sharing options...
Michaels 04 Banshee Posted July 28, 2014 Author Report Share Posted July 28, 2014 10/4 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted July 28, 2014 Report Share Posted July 28, 2014 Don't be cheap! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.