Jausmus Posted June 22, 2014 Report Share Posted June 22, 2014 When I bought my banshee I was told it was bored and stroked... I haven't measured anything yet do to lack of tools.. Piston is stamped 50 and rod 29L anybody out there know what rings need to be ordered and is it bored or stroked? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted June 22, 2014 Report Share Posted June 22, 2014 It's stroked by Denny wang. Get rid of it! As far as rings have the cylinder inspected first to make sure it only needs a hone. Quote Link to comment Share on other sites More sharing options...
Jausmus Posted June 22, 2014 Author Report Share Posted June 22, 2014 Ok thx! Will do.. Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted June 23, 2014 Report Share Posted June 23, 2014 29L is the oem 110 mm rod. 29L/R is the denny wang junk 115 mm rod Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted June 23, 2014 Report Share Posted June 23, 2014 As far as the rings having .50 on the top means it's .5mm over sized also .020". You'll have to inspect the piston further to find out what rings you need or if new pistons and boring is in your future. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted June 23, 2014 Report Share Posted June 23, 2014 29L is the oem 110 mm rod. 29L/R is the denny wang junk 115 mm rodShoot! I was just jumping the gun. I'm an asshole. BHP is correct. Quote Link to comment Share on other sites More sharing options...
Jausmus Posted June 23, 2014 Author Report Share Posted June 23, 2014 When I measured it caliper read 64.3 which is stock right? Thanks for the info fellas! Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted June 23, 2014 Report Share Posted June 23, 2014 54mm is stock. 64 would be a 10mm+ stroker. but its not likely that's what you have. take some pictures and report back. Quote Link to comment Share on other sites More sharing options...
Pasi S. Posted June 23, 2014 Report Share Posted June 23, 2014 (edited) 64.3? I would guess 64.25mm bore? Stock is 64 Edited June 23, 2014 by Pasi S. Quote Link to comment Share on other sites More sharing options...
Jausmus Posted June 24, 2014 Author Report Share Posted June 24, 2014 Think it's bored over 10.. The stroke is 52.5.. Does that sound about right? Quote Link to comment Share on other sites More sharing options...
Jausmus Posted June 24, 2014 Author Report Share Posted June 24, 2014 Piston reads .50 Quote Link to comment Share on other sites More sharing options...
satts Posted June 25, 2014 Report Share Posted June 25, 2014 54mm stroke and 64 mm bore is stock ,ffs Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.