bad 350 shee Posted June 22, 2014 Report Share Posted June 22, 2014 alright guys i just got my bike out after two years and everything went great i replaced the head light bulbs and then a few days later they started cutting out randomly well i took it out for a quick spin made it about 100 feet and it died pulled the plugs and i have no spark replaced the plugs still no spark. i have went through the harness and cant find anything wrong so my question now is where do i start any tips would be great thanks Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted June 22, 2014 Report Share Posted June 22, 2014 First thing check the stator with a multimeter, do you have a clymer? Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Starwriter Posted June 22, 2014 Report Share Posted June 22, 2014 http://bansheehq.com/forums/index.php?showtopic=133650 Quote Link to comment Share on other sites More sharing options...
Mr1Hundred Posted June 23, 2014 Report Share Posted June 23, 2014 also, grind down the paint for your ground wire Quote Link to comment Share on other sites More sharing options...
Young Guns Racing Posted June 26, 2014 Report Share Posted June 26, 2014 After all of the suggested steps are covered check your key switch if you still have one...I have seen 2 in person go bad and 3 on this site alone. Not an overly common problem but problematic enough and easily overlooked. Hope you get her right! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.