Jump to content

2 into 1 banshee exhaust? and the years first trail ride


Recommended Posts

I seen a guy yesterday that had a newer stock banshee that had a 2 into 1 exhaust on it. I talked to him for a bit and he claims its better than the typical exhaust setup on most banshees. He made a few rips up a hill and we even raced once. He beat me. He had paddles I didn't. He was talking about how if he went to a single carb it would also contribute to more horsepower.

 

I haven't seen much talk on here about the single pipe deal or the single carb deal. Well besides that my banshee was freakn amazing on the trails. The elkas were adjusted so my frame clearance was 8.5" in the front and 8.25" in the rear. The rebound on the rear was set at factory and the compression damping was set in the middle. The wider Jarm setup handled very nice. Well its running like it should be, handling is very good......the trail bike is complete. Nothing broke, shifted great. OH BTW, I drove that guys banshee. The exhaust did have a good sound to it. But what I was noticing is that how the trans was shifting. The mods I did to mine vs what a stock banshee had was a big difference.

Link to comment
Share on other sites

50% of the badassery of a Banshee originates from the dual pipe look. I would never change that.

The other 50% of the badassery would be the sound. I'd be afraid of altering that with a 2-to-1 exhaust.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...