Abe Posted September 8, 2014 Report Share Posted September 8, 2014 So jelly of those pipes dave, my cpi's have an estimated 2 sheets of cheap note book paper of clearance at frame so I see no way of you running them as they come leager Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted September 8, 2014 Report Share Posted September 8, 2014 Leager, not only is it one of the best performing small bore pipes but it looks as it would fit your bike without any issues Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted September 8, 2014 Report Share Posted September 8, 2014 I have CPI and nerfs. Want a pic of the frame. I know it's a stock frame. But better then nothing Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted September 8, 2014 Report Share Posted September 8, 2014 I have CPI and nerfs. Want a pic of the frame. I know it's a stock frame. But better then nothing NO Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted September 8, 2014 Report Share Posted September 8, 2014 NOI'm still gonna. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted September 8, 2014 Report Share Posted September 8, 2014 Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted September 8, 2014 Report Share Posted September 8, 2014 That is measuring from the lower bolt hole for the motor mount bracket. I didn't measure the height, but it appears to be around 1/2"-3/4" tall above the main frame rails. Sent from my DROID RAZR using Tapatalk Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted September 8, 2014 Report Share Posted September 8, 2014 Best pic on my phone with my PT's mounted. You can see the pipes are rubbing on the spud. That is after "massaging" the bottom of the pipes too... Sent from my DROID RAZR using Tapatalk Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted September 8, 2014 Report Share Posted September 8, 2014 I wonder why they didnt just weld it to the outside of the frame like my pro peg mounts? How much weld is holding yours on?I think it is probably a stronger design to have one solid piece in there. In the other frames that I have seen pics of, they have used the same install technique, but again, all of the others have been closer to the motor. The nerfs I used were built to fit a YFZ. That was the closest fit with the style if nerf that I wanted. Sent from my DROID RAZR using Tapatalk Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted September 8, 2014 Report Share Posted September 8, 2014 Awesome! Thanks Dave!! Now can you or someone else give me a pic of where the pipes meet the silencers near your pods? I have concerns there as well with the Snipers. Sent from my DROID RAZR using Tapatalk Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted September 8, 2014 Report Share Posted September 8, 2014 Damn you're needy Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted September 8, 2014 Report Share Posted September 8, 2014 Damn you're needyHa! That's probably what Rod kept saying to SKOOTER in his camper... Sent from my DROID RAZR using Tapatalk Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted September 8, 2014 Report Share Posted September 8, 2014 Damn you're needyHaha I don't blame him though! That would suck to drop the coin on the pipes and not have it fit. Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted September 8, 2014 Report Share Posted September 8, 2014 Haha I don't blame him though! That would suck to drop the coin on the pipes and not have it fit. ^^^ EXACTLY !!! ^^^ Dave, from looking at your pics on the desktop now, it sure looks like the Snipers will clear my nerf bar spud with just a bit to spare. My concerns on the silencer/pipe connection area is that I saw a couple of pics of Snipers that "appeared" as though the connection in that area ran kinda low as the pipes meet the silencers and transition around the rear upright frame. Things are very different on my frame in that area. Quote Link to comment Share on other sites More sharing options...
LaegerEliminator Posted September 8, 2014 Report Share Posted September 8, 2014 Sent from my iPhone using Tapatalk Pretty certain after seeing this that CPI's won't work for me. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.