Banshee SE Posted June 12, 2014 Report Share Posted June 12, 2014 What those things are? adjustable power jets??or Am I wrong? How these thing works? Or would be better just take them off? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted June 12, 2014 Report Share Posted June 12, 2014 Definitely adjustable Power jets. They will affect the top end jetting. Looks like a sloppy install though. I wouldn't even bother taking them out because there will just be a huge hole to fix. Not a big deal if you are good with metal, but it would take some talent to get them right. Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted June 12, 2014 Report Share Posted June 12, 2014 It's very possible that the rest of the carb has been modded for use with alky. If you are running gas, chances are they won't work for you anyway. It's somewhat rare for someone to put PJ's on gas carbs. Sent from a van down by the river Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted June 13, 2014 Author Report Share Posted June 13, 2014 It's very possible that the rest of the carb has been modded for use with alky. If you are running gas, chances are they won't work for you anyway. It's somewhat rare for someone to put PJ's on gas carbs. Sent from a van down by the river I don't know a shit about this so how can I know if they were using for Alky or not? Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted June 13, 2014 Author Report Share Posted June 13, 2014 Here's a picture inside the carb Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted June 13, 2014 Author Report Share Posted June 13, 2014 Definitely adjustable Power jets. They will affect the top end jetting. Looks like a sloppy install though. I wouldn't even bother taking them out because there will just be a huge hole to fix. Not a big deal if you are good with metal, but it would take some talent to get them right. At least It does not look big Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted June 13, 2014 Report Share Posted June 13, 2014 Look at the "dump tube" or needle jet and see if you can tell if it was drilled visually. If you can't tell , you'll have to measure it's I.D. I prefer to use a numbered drill bit set. Sent from a van down by the river Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted June 13, 2014 Author Report Share Posted June 13, 2014 The main looks drilled out. I'm guessing the whole thing has been setup Not sure Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted June 13, 2014 Author Report Share Posted June 13, 2014 I was thinking in get the sold, how much do you guy could I ask for them Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted June 13, 2014 Author Report Share Posted June 13, 2014 So they can't be use for gas again? Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted June 13, 2014 Report Share Posted June 13, 2014 So they can't be use for gas again?If you can find 2 cheap tower assemblies you can replace them..but I'd suggest just selling them and buy what you need. Sent from a van down by the river Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted June 13, 2014 Author Report Share Posted June 13, 2014 If you can find 2 cheap tower assemblies you can replace them..but I'd suggest just selling them and buy what you need. Sent from a van down by the river Honestly I don't see anything else modified beside the power jet Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted June 13, 2014 Report Share Posted June 13, 2014 Honestly I don't see anything else modified beside the power jetLook at the size of that main! Looks drilled. Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted June 13, 2014 Author Report Share Posted June 13, 2014 Anyway, if anybody is interested, pm me an offer for them!! Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted June 19, 2014 Author Report Share Posted June 19, 2014 so anybody can tell me what I'm gonna need to put back these carbs for gas? removed the adjustable jet, seal the mini holes and a new set of main jet? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.